How to Set up a wireless route

How to Set up a wireless route? What should I pay attention to when setting a wireless route? How can I set a route to be safe? The author takes D-LINK routing as an example to give you a detailed answer, other router settings refer to this example.

After connecting the router and the computer, if it is a wired connection, of course, you have to connect the network cable; if you want to connect wireless Internet, it is best to connect the network cable for the first time, so as to avoid unnecessary trouble .) Start the computer and router, enter the system, open the browser, enter the General router Default Gateway in the address bar: "192.168.1.1", and then press Enter. You may need to enter the account and password in the pop-up window. Enter the account and password in the manual to enter the user operation panel. You can change the account and password of the logon operation panel.

After entering the homepage of the Operation Panel, the online setting wizard button is displayed immediately. Do not mistakenly think about the special features. In fact, it is just a nice name to set the wireless route. Click this button to start our installation and setup journey. First stop step information. After you click the online settings wizard button, the page will jump to the step information page and tell the user the next step. No operations available. click Next.

The password setting page is displayed. This password is the password that we used to log on to the Operation Panel. You can modify it now to avoid the trouble of being intentionally or unintentionally modified by others through the default password. Enter the default password. Then, enter the new password twice, confirm the password, and click Next. Note how to set wireless routing. Remember your password.

Then we came to the time zone selection page, which is too familiar with settings. Let alone select Beijing, Hong Kong, Singapore, and Taipei Zone 8. Of course, if you are abroad, you can also select the corresponding time zone. Access the Internet at the south pole or North Pole ...... After the selection, click Next.

Next, we will go to the select WAN Type page, which provides four connection options: Dynamic IP address, fixed IP address, PPPoverEthernet (PPPoE) and other WAN types. You can set it according to your actual situation. Generally, most users use the ADSL dial-up Internet connection method. Then we select PPPoverEthernet and click Next to set the wireless route.

After entering the page for setting PPPoE, we can see that there are only a few simple input boxes. In the first box, enter the account that the ISP service provider gives you, that is, the account used for dial-up Internet access, enter the password below. For the service name, do not enter it. Then, click Next to set the wireless route and complete the steps for setting the wireless route.

After entering the "how to set wireless routing" page, we have successfully completed the Setup Wizard. Click the previous step to return to the previous page and reset the settings. Click "reactivate", save the settings in the previous steps, and activate them. Then we can access the Internet normally. After completing the simple setup wizard, you can access the Internet normally. But if we like to solve the root problem, we decided to understand the router settings. Click the wireless network button on the left navigation bar to go to the homepage of how to set the wireless route.

We can see that the page set for wireless is a bit familiar. That's right. One of the steps in the setup wizard is wireless settings. The setting content is the same as that on this page. If you want to use a wireless network, you must set the wireless end to active. The wireless network ID is used to identify the vro. Just enter your favorite ID. Select your own channel, while none is not recommended for security mode. Select other options and enter the security password. In this way, machines without passwords cannot easily connect to your network.

How to Set a wireless route. Then, click the WAN button to go to The WAN settings page. As we have said before in the setup wizard, generally, ADSL users use the PPPoE Method for dial-up Internet access. Select the PPPoE option and perform the following operations. Users who access the Internet in other ways can select the appropriate options.

Click PPPoE and set it in the following section. If you need to enter the MAC address of the local machine on the MAC address, you can click "Copy MAC address from the user end" to automatically obtain the MAC address of the local machine, which is very convenient. Click "dynamic PPPoE. As for PPPoE username, password, and service name, we have mentioned before that for dial-up Internet access, you only need to enter the account and password for dial-up Internet access.

The IP address and the settings of the Primary and Secondary DNS servers are the same as those set in WINDOWS. You can enter the relevant IP address. The maximum idle time is 5 minutes by default. You can modify the time as needed. MTU is the maximum data packet to be transmitted. The default value is 1492. If you require MTU, do not modify it. In the online mode, we click "connection with traffic", which means that the connection will automatically come online when a program needs to access the Internet.

Of course, you can choose to manually connect to Alibaba Cloud. Or you can choose to automatically keep online. Finally, the TTL value is changed and the activation status is retained. TTL (TTL) is a value in the IP protocol package. It tells the network router package whether the time in the network is too long and should be discarded. IGMP (Internet Group Management Protocol) remains active without modification.

Click the "execute" button at the bottom to save the setting of the wireless route. Next we will go to the LAN Settings page. A few simple boxes. after entering the box, you can. The first is the IP address, which we don't need to talk about. Then there is a sub-network mask, which is actually a sub-mask. We have seen a lot on windows, which is generally 255.255.255.0. The last is the domain name. If you want to add a domain name, enter the relevant name. By default, do not enter the domain name.

Finally, click the DHCP button to go to the dynamic IP Address Allocation page. If you want the computer connected to the vro to automatically obtain the IP address, you must activate the DHCP server function. Enter the start and end IP addresses and define the CIDR blocks for Automatically Obtaining the IP addresses. The lease time is to set the time available for the assigned IP address. After expiration, it is automatically changed to another IP address.

To enable the fixed DHCP function, click the activation option below and enter the corresponding information in the input box. We can also see the current dynamic and static DHCP status in the following status table. Click execute to save the settings. The second item in the top navigation bar is advanced settings. After you click it, the set homepage is displayed, that is, the virtual server settings page.

To use the virtual server function, Click Activate and enter the service name of the server to differentiate different services. Then, enter the IP address, personal, public port, and protocol to be used as the server. Scheduling is the time when the virtual server is enabled. It can be enabled all the time, or at a specified time. Finally, we can see the added service in the virtual server list and click the modify icon to set the wireless route.

Special application functions allow users to execute specific software under NAT. The required information is basically the same as that of the virtual server, but there is only one more trigger port segment. We can enter the port segment of the application. Click "Save settings.

Filters are used to filter specific networks and connections. We can filter through IP, URL, MAC, and domain. After selecting different options, different input boxes will appear below, so that you can easily set them. If you want to enable the IP address filtering function, you need to select "activation" and enter the IP address or IP address, port range, and Protocol below. Then, determine the filtering time and click execute.

Then we enter the firewall settings interface. The firewall settings are basically the same as those on the computer. After activation, select allow or disable communication, enter the source and destination IP addresses, and enter the port and application time. After setting, you can select whether to enable the rule in the selection box before the list, which is convenient and easy to use.

This vro has more than one consideration. It also provides the DDNS dynamic domain name service function. It provides great convenience for users who want to build websites with their own computers. After it is enabled, select the provider and enter the host name. The account and password are used to complete this setting, which is very simple! Below the dynamic Domain Name Service is DMZ, a commonly known isolation zone or a non-military zone, which can completely expose a computer to the Internet. Do you want to "expose? Click "Activate" and enter the IP address to expose it. Of course, we do not recommend that you make such bold moves ".

Finally, we enter the Wireless Settings page, which is used for further operations on Wireless Settings. Generally, you do not need to modify it. You can use the default value. The following provides several glossary to help users who need to change these settings. As for what purpose, a special article will be introduced.
◆ Beacons is a data packet sent synchronously from the wireless network base station (ap) to the wireless network.
◆ RTS is the request sent by RequestToSend.
◆ Fragmentation is the splitting of data packets.
◆ DTIM indicates the data to be transmitted.
◆ The wireless mode is the wireless transmission protocol. Select Mixedmode for mixed mode and Gmode for G protocol.
◆ The transmission rate is the maximum wireless transmission rate, which can be limited here.
◆ SSID is used to distinguish different networks. By default, the network can be searched by other devices.

Click "Tools" in the top navigation bar to go to the administrator system page. Here, we can change the Administrator's password and add a user account. By default, the admin Administrator account is created for the router. You can enter the old password and the new password you want to use in the password box below to change the password. Of course, if you want to create a restricted user account, you can enter the password in the box below.

How to Set a wireless route: If you want to remotely manage a vro, You can activate this function, enter the IP address of the remote computer on the IP address, and log on to the port. Click "run" to save the settings. Next, let's take a look at the time tool page. The vro provides the NTP activation function. This function is exactly the same as that on XP, and is used to obtain the time through the network. If you want to obtain the time in this way, activate NTP and select the server and time zone.

In addition to the NTP function, you can also manually set the time. Just select this option and adjust the date and time. The last one is the Daylight Saving Time option. I didn't understand what it meant at the beginning. It turns out that this is what the Daylight Saving Time means. It is estimated that Chinese friends will not use this option. On the system settings page, you can back up and save the current settings and load the saved settings to facilitate future management. At the same time, a button is provided to restore the factory settings, from which we can see that this vro is still user-friendly.

I think it is more acceptable to change firmware to firmware update. After downloading the firmware file, click the Browse button to select the firmware file and click execute to start upgrading the firmware of the vro. Pay attention to how to set wireless routes. Ensure that power is not interrupted during the upgrade. Otherwise, an inexplicable problem may occur.

Finally, we have other projects left. After we jump to this page, a series of options are displayed, but they are all single-threaded, which is very simple. The purpose is indicated on the page, so there is no need to explain it too much. However, it is worth noting that the "XBOX support" function of the vro is available, which is really considerate and worthy of appreciation.

Finally, we entered the system status column. Under the system information, we can see detailed router settings, including LAN, WAN, and wireless. Detailed status information, clear at a glance. On this page, the only thing we can do is to disconnect and connect to the network. There are only two buttons, which is very simple. Click the system record button on the left to go to the log page. If you find any problems, you can view the system logs here to facilitate maintenance. Click the Advanced Settings button to set the log.

On the traffic statistics page, you can view the current WAN, LAN, and wireless traffic information. Click the Update page to refresh the current data. The reset button returns the data to zero. On the Wireless User List page, we can detect the wireless devices currently connected to the vro to see if other unknown machines have intruded into our network. Click the Update page to refresh the information.

Click the NAT status button to go to the relevant page to view the current NAT Network Address Translation status. D-LINK wireless routing settings in accordance with the above steps can be introduced in detail, if you do not understand can post to the Forum for help. You may wish to pay attention to the following article: how to set up and control the Internet access through wireless router routing under different bandwidth.