tp-wr842n Router set relay mode first step, operating computer settings
1, set up operating computer network parameters
Please set the wireless network card that operates the computer to manually specify the IP address.
2, wireless connection Mini Router
The computer searches the mini router for a wireless signal (TP-LINK_XXXXXX) and connects.
TP-WR842N Router Set relay mode The second step, the landing router management interface
1, enter the administrative address
Open the browser on your computer's desktop, empty the address bar and enter 192.168.1.253, and the page will eject the login box.
2, Login Management interface
In the Login password box, enter the default management password for the router: admin, click Login, and enter the admin interface.
TP-WR842N Router Set relay mode step three, set up the router according to the Setup Wizard
1. Start Setup Wizard
Enter the router's admin interface, click the Setup Wizard and click Next.
2. Select working mode
Select Repeater: Relay mode, click Next.
3. Scan Signal
In the Wireless Settings page, click Scan.
4, select the main router signal
Locate the main router's SSID in the scan page and click Connect.
Note: If the primary router signal is not scanned, verify that the primary router is switched on and try to reduce the distance between the primary router and the mini router.
5, enter the wireless password
Enter the wireless password for the main router at the key location and click Next.
6, restart the router
Click Reboot and click OK for the pop-up dialog box.
TP-WR842N Router Set relay mode step fourth, confirm that the settings are successful
The computer's IP address is set to automatically obtain, and scan the signal after the wireless relay, to determine the signal strength has been enhanced, connect the wireless signal (Zhangsan) can access the Internet.
At this point, the Repeater mode setting is complete. Wireless Terminal connection set up a good wireless signal, the desktop using a cable to connect the Internet.