1, SSD: That is solid-state hard drive.
2, BIOS: The motherboard setup interface. Early entry mode is del key, Lenovo Desktop is F1,lenovo notebook computer for F2 key/fn+f2 key.
3, up/down/left arrow: Refers to the keyboard on the top and bottom direction key.
4, enter: That is the return key, or call the confirmation button.
5, SATA Drive: That is, the hard drive, installed after the BIOS this option will be changed from None to SSDs name.
6, F10 key: F10 in the BIOS function to save settings and exit.
7, F12 key: F12 at the start of the function for the launch menu.
Operation Steps:
1, after the installation of SSD, the boot press F1 key into the BIOS, up and down the arrow select System Summary (Systems Overview), selected, click Enter (enter);
2. After entering, find the SATA drive 0/1/2 see if the SSD has been identified. See figure below:
3, if the confirmation has been recognized (can see the addition of SSD), press the ESC key (the upper left corner of the keyboard) back to the main interface, left and right arrow selection, Startup (startup settings), use up and down arrows to select primary boot Sequence (main boot sequence), Tap Enter to enter.
4, in this interface can see the starting order, up and down arrows to choose their own installed solid-state hard disk (SSD), press the "+" key to adjust to the first position (the top position).
5, adjust to the first position, press the keyboard F10 (F10 in the BIOS function to save settings and exit) key (F10 key in the top row of the keyboard), in the pop-up dialog box, select Yes (yes).
6, the computer will be restarted at this time, the need to constantly tap the keyboard F12 key, pop-up dialog box as shown in the following image: At this point can see the installation of the Intel SSD has been the first startup item, press ENTER key (enter) can be.
