How to set up the broadband speed-limiting function of Tp-link wireless router

Tp-link Wireless router's broadband speed limit function setting method

1, open the Tp-link Router Web management interface: In the Browse input 192.168.1.1 (Tp-link router default management address)---> enter username and password, the default is admin---> click "OK". (192.168.1.1 not open?) Click to read: Tp-link router 192.168.1.1 not open solution)

2, check the DHCP server IP address pool: Click on "DHCP Server", and remember the address pool start address and end address.

3, open the "IP Broadband Control" function and set parameters: Click on "IP Broadband control"---> Check "Open IP Broadband Control"---> in "Please fill in the width of your application bandwidth" after filling in your broadband maximum (1M=1000KB)

4, set the speed limit parameters: In the "IP address segment" Fill in the DHCP server address pool start address and end address---> under "mode" select "Limit Maximum bandwidth"---> Fill in the "Broadband size" column to allow maximum bandwidth---> in "Enable" Check the box below---> click "Save"

5, restart the router: Click on the left side of the "System Tools"---> choose "Restart the router"---> click on the right "restart Router" button---> click "OK", restart completed just set the speed limit strategy is effective.