How to set up the tl-wdr6300 router as a switch

graphic design of the tl-wdr6300 router as a switch

Step one: Set Up computer IP

Before setting up, you need to set the IP address of the computer to be automatically obtained (dynamic IP), as shown in the following figure.

Step two: Computer connection tl-wdr6300 Router

To prepare a network cable, a network cable connected to the computer cable interface, the other end of the network connection tl-wdr6300 router LAN interface (1, 2, 3, 4) any one, as shown in the following figure:

Note the problem: Do not connect the tl-wdr6300 router with other routers, only need to connect the tl-wdr6300 router and computer.

Step three: Set up the tl-wdr6300 router

1. Modify LAN Port IP address

After entering the TL-WDR6300 settings interface, click "Network Parameters"--> "LAN Port Settings"--> "IP Address" modified to:192.168.1.2--> "save".

Note: If the previous router's settings URL is 192.168.0.1, then should be the TL-WDR6300 router LAN port IP address modified to: 192.168.0.2, this point please the majority of netizens attention.

Restart the router: After clicking Save, the router prompts for a reboot and clicks "OK" according to the prompts.

Warm hint: After tl-wdr6300 reboot, the user needs to enter in the browser: 192.168.1.2来 Login Router.

2. Shut down the DHCP server

Re-log on to the Tl-wdr6300 settings interface, click on the "DHCP server"--> "DHCP service"--> "DHCP server" select: Do not enable--> "save".

Step four: tl-wdr6300 connect the front-end router

Then prepare a network cable, a LAN interface connecting the front-end router, the other end of the LAN port to connect the tl-wdr6300 router (1, 2, 3, 4) any of the attention is not a WAN interface, if connected to the WAN interface is not available, please the vast number of users attention.

At this point, the tl-wdr6300 wireless router is set up as a switch, and if the user needs to use a wireless network on the tl-wdr6300 router, just set the WiFi name and password.