Telecom Wireless Optical Cat Setup method
This article takes ZTE F460onu as an example, introduces the setting method, the open business includes, voice (telephone), broadband, IPTV.
First of all, do a physical connection, here do not introduce, not clear to ask me alone.
After connecting the 192.168.1.1 into the Light Cat settings page, user name: telecomadmin Password: ne7ja%5m
Most of the following configuration information telecommunications has been completed, so, just to control the following steps, as needed to modify, do not recommend blindly modify configuration, will cause light cats can not normal communication.
The first step: Configure the logical ID and password, this is the telecommunications assigned to uniquely identify your ONU equipment, do not change it, the password is also very important, do not change it. This data is installed by the installer to your home when the installation is entered and the terminal is registered. Once changed, the cat will not be able to communicate
The second step: Configure Voice (telephone) business, configure the following figure, where the configuration information, everyone is different, this data do not move it, or home phone will not get through.
The third step is to configure the broadband connection, which is more important, before configuring this please remember the original VLAN ID, this article is 41, and then create a new WAN connection, the following figure to configure (note the Port bindings section, 2 is not checked, because it is used for IPTV), VLAN ID with your own value. In this way, the light cat will be able to automatically dial the Internet, home can also have more than one computer online, do not have to create a new broadband connection on the computer to dial.
The fourth step, wireless configuration, basic settings This relatively simple, the first wireless switch is selected to open, the other unchanged.