Step One: Set up a virtual server (port mapping)
1 Set method One:
1. Add New entries
Login to the Router admin interface, enter forwarding rules > virtual Server, and click Add New entry.
22. Add Mapping Rules
Add the ports that the server maps to the extranet, the actual port, and the server IP address.
3 Note: The service port can be modified according to the actual needs, the internal port must be consistent with the server port.
The list is as follows when the add completes:
At this point, the virtual server (port mapping) rule setting is complete.
Set method Two:
1, download and landing peanut shell dynamic Domain name analysis software;
2, click the Intranet map to open the Web-side Settings page;
3, click Add Mapping, fill in mapping information;
4, click OK, you can generate an external network access address.
End
Second step: External Network access intranet server
According to the above settings, the external network computer through the browser to enter the domain name or IP address + port number to access the Web server, access to the following forms:
Note: Some servers require the use of client or app access, the specific form of access to the actual server requirements prevail.
If your broadband is not a static IP address, you can request a domain name in Dynamic DNS and log in to the router, and then use your domain name and an open port number to access the server after you log on.