How to set up the Tplink router's repeater

Relay Setting method of Tplink router

1: Base station setup: tl-wr914n

Description: Many cases on the Internet require the WSD state as the main router (base station) to be set to "on", and we found in the actual operation of the main router (base station) WSD state set to "open", there will be an error. setting to "Do not open" is available instead.!!!!

Network parameters: LAN settings

The IP of the base station is: 192.168.1.1

Note: The base station WDS is not open

2: Relay settings: tl-wr2041n

The relay WAN port is set to dynamic IP and is automatically detected

Note: To focus on the following figure, you must set the intermediate IP to: 192.168.1.2

Through the above settings to achieve the intermediate bridge.