How to set up Tplink dual routing system

　　 Tplink Dual Routing system setting method

1, the secondary route and the main route IP settings must be different;

If the primary routing ip is 192.168.1.1, the secondary routing IP should be set to 196.168.2.1 (the secondary routing ip is set in the LAN setting).

As shown in figure:

2, secondary by IP access for dynamic IP access, in the secondary routing settings can be set.

As shown in figure:

3, network cable Connection mode;

A network cable (which can be used by the computer) from either the master route or the hub is connected to the secondary routed WAN and becomes the input signal.

4, secondary routing other facilities are normal.

Note: Must choose the regular factory production Tp-link as the subordinate route (because different factory's routing product system is absolutely different, some subordinate routing program includes the related setting, sometimes will attack the main router, produces all can not use normally.) )

Recommendation: Main Routing and secondary routing for the same factory products, manufacturers are very important.