Using a vro desktop computer and a laptop to share the bandwidth, First connect the vro to the WAN port of the ADSL cat through the root network, and then connect the vro to the computer using the root network to ensure the connection is successful, open your computer's IE browser and enter the IP address of your router. Generally, 192.168.1.1 is used. Then, press enter to bring up the user name and password input interface. The default user name is admin and the password is admin, there will be a prompt after this vro, and then enter the vro, which contains the setting wizard option. After you click it, a prompt will pop up on the right to let you proceed. Click as prompted, one step is to enter the user name and password of the Internet dial-up, that is, the user name and password of your usual Internet dial-up broadband connection. after entering the user name, follow the prompts to complete the next step. Then set the wireless network. After you click "Wireless Settings", the SSID number will pop up on the right side of the page for you to enter. You can enter the number yourself, this name is the name of the wireless broadcast you want to search for in your laptop wireless Internet access. after entering the name, let us choose the encryption method. Of course, you can also choose not to set the password. For security, set encryption, enter the password. This password is used when you use a laptop to connect to the wireless network for the first time. If you do not set a wireless connection, the laptop can only be connected with the lan port of the router. The desktop must be connected with a network cable, unless your desktop has an external wireless network card. In this way, your laptop and desktop can access the Internet at the same time. After the vro broadcasting number can access the Internet, the computer can access the Internet directly without dialing each time.