How to solve the problem of booting to press the F1 key to enter the system

The cause and solution of the system by pressing F1 in the boot:

Situation One: The computer does not have a floppy disk drive, but in the BIOS set the Detect floppy disk option, that is, the computer itself does not have a floppy drive, but the BIOS will automatically detect the floppy drive, the BIOS can not detect the floppy drive in the case of the need to press F1 to continue; The floppy drive is typically named floppy in the BIOS. Or the default drive.a is the floppy drive;

Workaround: Turn off the detect floppy drive in the BIOS setup, press the DEL key at boot to enter the BIOS settings, usually in the first setting, look for drive A or drive B, press PgUp or PGDN on the keyboard, set them to "none" not detected, or find the " Floppy "option, set this option to" none "does not detect, and finally press F10 (save and exit), select Yes, the computer restarts can solve the power-on press F1 to enter the system problem, as shown in the following image:

Situation Two: The motherboard battery is low or damaged, the motherboard battery is used to ensure the motherboard BIOS power supply in the case of the computer loses power, thereby saving the user's BIOS setup information, once the motherboard battery power is low or damaged system will definitely prompt alert! System battery voltage is low, which requires you to resolve or prompt for "CMOS battery failed" (battery failure), you will be prompted to press F1 in case of unresolved conditions to ensure that the BIOS information is not lost;

WORKAROUND: Replace the motherboard BIOS battery first after determining that it is not possible to charge the motherboard for damage.

Situation Three: System hard disk corruption, when prompted "3rd Master harddisk:s.m.a.r.t. Status bad Backup and Replace", indicates that the system detects the computer's third hard disk corruption, it is recommended that you back up important data in a timely manner, when the problem is not resolved, You will also be prompted to press F1 to continue;

Workaround: Locate the other hard drive on the non-primary hard drive, install the hard drive on the other computer for data export, and then replace or repair the hard drive;

Situation four. CPU fan is not working properly, the boot prompt "CPU fan Error" (CPU fans are not normal), this indicates that the CPU fan may be stopped, if continue to run the CPU because the temperature is too high may lead to the freezing, blue screen, burning, etc., before the problem is resolved, you will also be prompted to press F1 to continue;

Workaround: Open the chassis to see if the CPU fan is not working properly, if yes, replace the CPU fan or repair the motherboard;

Scenario Five: The motherboard CMOS time and date is not set, the "CMOS Date/time not set" (CMOS time and date not set) is started, and the BIOS will also prompt the need to press F1 to enter the system;

Workaround: Press the DEL key to enter the BIOS settings, in the first item, find the date and time items, set the date and the dates, press F10 and select Yes to save the exit;

Situation six. USB device problems, boot prompt: "USB mass storage device found and configured" (need to configure the discovered USB device), prompted to press F1 to continue;

Solution: This indicates that in the boot has been inserted in the U disk, this situation is best to unplug the U disk after the opening of the computer can be resolved;

Finally, the system prompts to press F1 to continue to enter the system, you know the problem, but in the premise of not solving the problem, but do not want the system prompts, can be used to turn off the BIOS error method: Boot Press Del to enter the BIOS settings, found in the first item "Halt on" (Prompt and stop when error occurs), Set the selection to none by PgUp or PGDN, which means no errors are prompted!

Summary: Do not detect the floppy drive, replace the BIOS battery, reseat the keyboard and mouse is the most common way to solve the power-on press F1 to enter the system, power-on-F1 solution is actually very simple, if the symptoms appear in this article is not described, you can write down the system tips in English translation, Can be very accurate to know the power-on press F1 to enter the system is the problem.