How to solve the problem when the desktop computer is switched on for a continuous automatic reboot

1. First to Safe mode test to see if the scan is poisoned?

2. Clean up the system garbage, start the item.

3. May be the power supply voltage is not stable, you can also change the root line to try or borrow a good power to change the test.

In many cases, the computer will be inexplicably automatic shutdown, automatic restart, frequent crashes, frequent blue screen. This situation is the computer in the process of using the most frequent failures. There are three main reasons for this failure:

1, PCI equipment, memory, and other equipment did not stick or loose;

2, the hardware equipment is incompatible or the equipment itself has the quality problem;

3, the hard drive has bad road or bad sector. If the hardware is not a problem, then the computer automatically shutdown, automatic restart, frequent crashes, frequent blue screen reasons for more than 95% of this reason.

The solution to the problem should be "soft and hard", namely:

1, to solve the hard disk has bad or bad sector problems, you can use the SFC command and chkdsk command for soft repair. Click "Start"--"Run"--Enter the command character in the window that appears, and then follow the prompts in the window. It is important to note that you are sometimes asked to reboot the computer and repair it at the same time as the reboot.

2, check the PCI equipment (such as: Video card, sound card, network card, etc.) and whether the memory is loose, it is best to plug out once, check the gold finger part of whether there is oxidation or fall off.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join