How to troubleshoot hard drive failures

How to troubleshoot a hard drive?

When we buy the hard drive, we say 500G, but the actual capacity is 500G small. Because the factory is according to 1MB=1000KB to convert, so we buy a new hard drive, than buy when actual dosage to be smaller. Normal use of the computer if the hard drive failure is very nerve-racking.

Next, let's take a look at the detailed knowledge of the hard disk.

1, the hard disk in the time when some of the voice of the zloty, this is the general situation of new hard disk, these situations are mostly used when the time will ring up, a while, it is not a fault, this is a new hard drive in the running-in, we do not care, after a period of time will be good.

2, I use the computer when the hard disk location of the sound, this is generally because of the system and hard drive incompatibility caused by this case we need to reinstall the system, install a genuine system general problem solved. System caused by a lot of such failures, we should pay attention to.

3, the computer when the use of irregular black screen or appear a lot of lattice, stripes and so on, these may be the hard disk socket loose, we can open the chassis and plug in our hard drive, the general fault can be ruled out, this situation is a lot, we remember this trick can be.

4, the computer turned on suddenly blue screen situation, or blue screen when there are stripes constantly appear, such a situation is usually a hard drive failure, the biggest reason is that the hard disk damage, such a situation requires us to buy a new hard drive to replace, generally can go to their own brand computer after the department to replace the sale.

5, the above is the hard disk general failure occurred after we need to deal with some of the basic steps, these failures are not ruled out by other hardware, but the most likely hard disk.