How to use inkjet printer?

Inkjet printer According to working principle can be divided into solid inkjet and liquid inkjet two (now and later more common), and liquid ink-jet mode can be divided into bubbles (canon and HP) and liquid Piezoelectric (Epson). The Bubble technology (bubble jet) is used to heat the nozzle so that ink bubbles are sprayed on the print medium.

Where the printer is placed

Choose a better placement, you can avoid a lot of unnecessary trouble.

A, the printer on the level, stable surface.

B, the printer is easy to connect the computer or network interface cable, and can easily cut off the power of the place.

C, set aside enough space for easy operation and maintenance; Leave a large enough place in front of the printer to make the paper out.

D, avoid in the temperature and humidity abrupt place use and place the printer, the printer should be away from direct sunlight, strong light source and heating device.

E, avoid placing the printer in a vibrating place.

Connection to the printer cable

A, verify that the computer, printer is in the shutdown state, and cut off the power.

B, according to the random accompanying "printer manual" to connect with the computer or network interface cable.

C, check the voltage on the label on the back of the printer to confirm that the voltage required by the printer matches the voltage of the socket you plug in.

D, confirm the above three steps are correct, and then connect the power.

Power-on use

A, first open the printer, and then turn on the computer.

B, refer to the random accompanying "printer instructions", loaded with ink cartridges.

When installing ink cartridges, there are a few caveats to follow.

1, the ink cartridge is not ready to use, it is not appropriate to remove the packaging.

2. After removing the lid and tape of the ink box, the ink box should be installed immediately.

3, take the ink box, do not touch the print head.

4, print head contains ink, it can not be printed head upside down, also can not shake the ink box.

C, when the cartridge is installed, perform the "Print head" cleaning operation, the printer debugging to the normal use of the state.

Software Settings

A, driver installation: Generally buy a printer, the manufacturer will be random with the Driver: Window control system also has some of the printer driver. You can also download the driver directly from the manufacturer's website. But best of all, the driver downloaded from the manufacturer's website, because the driver downloaded from the Internet, is the latest driver.

B, open the computer taskbar settings in the "printer", the target printer corresponding to the driver set to "Default printer."

C, in the use of each application software, and then according to the specific needs of the printer "properties" to set.

Shutdown

A, before shutting down, you should check and verify that the printer is in a normal standby state.

B, if the ink light prompts should be timely change ink cartridges, the printer in other work should wait for the operation of the completion of the printing can be shutdown.

C, shutdown, should be turned off the printer power button to shut down the machine, do not directly cut off the power of the way, otherwise it will have serious consequences.

D, after the shutdown, the application of cloth will cover the printer, lest dust intrusion on the printer caused damage.