How to Use ghost to install the system in a notebook that does not support USB boot when no optical drive is available

Source: Internet
Author: User

Many ultra-light laptops do not have their own optical drives. In addition to installing the system, buying an external USB optical drive is usually useless.
However, it may be difficult for the system to be reinstalled. It is better to enable a USB hard disk or USB flash disk. If a USB device is not supported, you only need to remove the hard disk to install the system.
If the laptop is hard drive that is difficult to disassemble, or you do not want to detach the hard drive, try the following method. Generally, the built-in NICs in The Notebook support PXE startup.

Preparations:

Tool: a healthy computer (can be used normally, and the NIC is normal );

Software: super one-click Network gram 4.0.0s (PXE version, search is easy to find)

Applicable scope: Any computer that supports starting from the NIC (For details, refer to the boot items in the BIOS ).

Note: The NIC used by the computer cannot be independent, but must be integrated on the motherboard.

 

Start Operation:

First, use a healthy computer to download a ghost version from the Internet. (There are a lot of systems on the Internet. Of course you can do it yourself. Here we will not talk nonsense, yes. The suffix is. gho files, other files are not needed. The files downloaded from the Internet are generally ISO package files. You can use the virtual optical drive to load and extract the files. generate the gho file. Then download and install the super one-click netke 4.0.0s (PXE version). Here we will not talk about it much, just do it:

Double-click the application named onekeypxeProgramLater, the installation interface will appear (of course, follow the next step)

 


Wait a moment and the installation completion page will appear (click Finish ~)

 

At this time, an icon named onekeysrv will appear on the desktop. Double-click the icon and a setting interface will appear. First, select the image file (that is, the previously prepared gho file, and the file path is random, the file name is recommended in English) and then select the restore image option in the task column below. In the other column, select tftpd32 for the PXE service and click Next. After setting

 

The next setting interface is displayed. If you want to save a notebook just like the author, you can check "restart the client after the network gram is finished", and you don't need to worry about anything else, you can directly use the default software settings, and then click Finish,

 

At this time, a dialog box appears on the desktop, prompting: When all clients are connected, click "Send start Operation" to confirm.

 

After the interface appears, we will connect the laptop that needs to recover the system to the computer where the netgram software is installed through the router or LAN cable:

 

Select the boot mode from the NIC in The Notebook (I will not go into details here ). When the laptop is started correctly through the NIC boot, you will see the interface, and then select the appropriate Nic type for your computer (you can view the specific software, or select automatic loading) and press Enter:

 

When this interface appears, it indicates that the program is detecting the appropriate NIC Driver. Wait a moment:

 

Fully-automated network cloning. If a system is restored, I suggest using the fully-automated mode. Otherwise, you can press ESC to enter the advanced network mode, there are many other options and functions available:

 

You don't need to talk about this step. The familiar ghost recovery interface will wait for a moment. After the recovery is complete, the notebook will automatically restart and it will be done!

 

conclusion: you may feel confused here. To tell the truth, there are still many ways to implement the results as described by the author. However, I personally think that this method and software are relatively stupid and efficient. As long as you do more work and think about it, you can find many interesting places, and you can not only configure a computer, by adjusting the network gram software mode, you can recover several or even dozens or hundreds of computers at the same time, and as long as your computer can start through the integrated network card, whether or not you have used it, can recover the system. Of course, the author's level is limited, so it cannot be all demonstrated. It can only serve as an example. the article may not be described in detail in many other places. If you do not understand it, please include it. You can search for relevant information to supplement it.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.