How to use the programmable voltage detector for STM32

Source: Internet
Author: User


How to use the programmable voltage detector for STM32Mind Map Overview:




Code:
 
 
  1 #include "sys.h"
  2 #include "delay.h"
  3 #include "usart.h"
  4 #include "led.h"
  5 #include "oled.h"
  6 #include "24cxx.h"
  7 #include "w25qxx.h" 
  8 
  9 #include "key.h"
 10 #include "adc.h"
 11 #include "npa.h"
 12 #include "bluetooth.h"
 13 #include "rtc.h"
 14 
 15 const u8 TEXT_Buffer[]={"SPI3 TEST"};
 16 
 17 const u8 AT_Buffer[]={"AT\n\r"};
 18 #define SIZE sizeof(TEXT_Buffer)    
 19 #define At_SIZE sizeof(AT_Buffer)    
 20     
 21 void PVD_Config(void);
 22 int main(void)
 23 { 
 24         PVD_Config();
 25     
 26     NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);//设置系统中断优先级分组2
 27     delay_init(168);     //初始化延时函数
 28     //uart_init(115200);    //初始化串口波特率为115200
 29     //AT24CXX_Init();    
 30     LED_Init();                    //初始化LED
 31     oled_init();
 32     //W25QXX_Init();
 33     KEY_Init();
 34     //Adc_Init();
 35     //    NPAsensor_Bar_Init();
 36     LED_Init();
 37     LED0=1;
 38     //My_RTC_Init();                 //初始化RTC
 39     //RTC_Set_WakeUp(RTC_WakeUpClock_CK_SPRE_16bits,0);        //配置WAKE UP中断,1秒钟中断一次
 40 
 41     //BLUT_Init();
 42     //BLUT_SW=0;
 43 
 44 
 45     //oled_memery_clear(0x00);
 46     oled_display_chs((unsigned char *)"ok:",0,0,16,0);
 47     oled_display_refresh();
 48     
 49     
 50 
 51     
 52 
 53         while(1)
 54     {
 55         
 56         if(PWR_GetFlagStatus(PWR_FLAG_PVDO)==RESET)
 57         {
 58                 oled_display_chs((unsigned char *)"reset:",0,32,16,0);
 59             oled_display_refresh();
 60         }
 61         else
 62         {
 63                 oled_display_chs((unsigned char *)"set:",0,46,16,0);
 64             oled_display_refresh();
 65         }
 66     }
 67 }
 68 /**
 69 00083   * @brief  Configures the PVD resources.
 70 00084   * @param  None
 71 00085   * @retval None
 72 00086   */
 73 void PVD_Config(void)
 74 {
 75         NVIC_InitTypeDef NVIC_InitStructure;
 76         EXTI_InitTypeDef EXTI_InitStructure;
 77 
 78         /* Enable PWR clock */
 79         RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
 80 
 81         /* Configure one bit for preemption priority */
 82         NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
 83 
 84         /* Enable the PVD Interrupt */
 85         NVIC_InitStructure.NVIC_IRQChannel = PVD_IRQn;
 86         NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
 87         NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
 88         NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
 89         NVIC_Init(&NVIC_InitStructure);
 90         /* Configure EXTI Line16(PVD Output) to generate an interrupt on rising and
 91         falling edges */
 92         EXTI_ClearITPendingBit(EXTI_Line16);
 93         EXTI_InitStructure.EXTI_Line = EXTI_Line16;
 94         EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
 95         EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling;//change  EXTI_Trigger_Rising_Falling
 96         EXTI_InitStructure.EXTI_LineCmd = ENABLE;
 97         EXTI_Init(&EXTI_InitStructure);
 98 
 99         /* Configure the PVD Level to 3 (PVD detection level set to 2.5V, refer to the
100         electrical characteristics of you device datasheet for more details) */
101         PWR_PVDLevelConfig(PWR_PVDLevel_5);
102 
103         /* Enable the PVD Output */
104         PWR_PVDCmd(ENABLE);
105 }
106  
107 /******************************************************************************/
108  /*                 STM32F4xx Peripherals Interrupt Handlers                   */
109  /*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
110  /*  available peripheral interrupt handler‘s name please refer to the startup */
111  /*  file (startup_stm32f40xx.s.startup_stm32f427x.s).                         */
112  /******************************************************************************/
113   
114  /**
115    * @brief  This function handles the PVD Output interrupt request.
116    * @param  None
117    * @retval None
118  */
119  void PVD_IRQHandler(void)
120  {
121    if(EXTI_GetITStatus(EXTI_Line16) != RESET)
122    {
123      /* Toggle LED1 */
124     // STM_EVAL_LEDToggle(LED1);
125          LED0=0;
126        oled_display_chs((unsigned char *)"low",0,16,16,0);
127          oled_display_refresh();
128          
129          
130          
131      /* Clear the Key Button EXTI line pending bit */
132      EXTI_ClearITPendingBit(EXTI_Line16);
133    }
134 }
Source from STM32 official help documentation, which is available in the Help documentation and has code


How to use the programmable voltage detector for STM32


Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.