Procedure:
HDMI in: Slide the HDMI pin on the Presenter Module to the "input" position. Then, you can use the HDMI interface to receive signals from connected video input devices (such as computers.
• When the projector is enabled and detects an external video input device compatible with HDMI, the projector displays a video signal from the external device.
• When the projector is enabled but no external video input device compatible with HDMI is detected, the projector displays a video signal from the tablet.
HDMI out: Slide the HDMI pin on the Presenter Module to the "output" position. Then you can use the HDMI interface for external display. The supported resolutions are 1920x1080 pixels @ 60Hz and 24bpp. When the Presenter Module is connected to both the external monitor and your tablet, observe whether the following conditions occur:
• When the projector is enabled, video signals from the tablet are displayed through the projector rather than external display.
• When the projector is off, the video signal from the tablet is displayed on the external display through the HDMI interface.
Note:
To use the projector on the ThinkPad X1 Tablet Presenter Module:
The ThinkPad X1 Tablet Presenter Module pop-up utility must be installed on the computer. Your computer may have been preinstalled with this program. In this case, you can directly use the projector. Otherwise, download and install the program from http://think.lenovo.com.cn.
To configure the Projector Settings, visit the Lenovo Settings plugin to display the Projector X1 Projector and follow the instructions on the screen.
Driver name: Presenter Module Popup program (Windows 10 64-bit/8.1 64-bit)
Bytes