How to use XP's own Super Terminal and Bluetooth to communicate with the mobile phone at command

First, the mobile phone and the PC must have a Bluetooth function. Turn on the Bluetooth function of the mobile phone and the PC, let the PC find the bluetooth device, the mobile phone accepts the binding, the password can be set to more than 6 digits.

 

Open "start"-> "attachment"-> "communication"-> "Super Terminal", create a new connection, and name it at will. select "com 10" on the connection method, as shown in:

 

 

Click "Connect" to connect your phone to your PC through Bluetooth. in "terminal screen before dialing", enter at and press Enter. If OK is returned, the connection is successful. In this case, you can enter at command to control the phone. as shown in (the mobile phone is Motorola's new ve66 ).

 

 

 

 

Some common at command examples (taking a Motorola mobile phone as an example ):

 

1) unit identification
When beginning to build a communication link, a general DTE application controlling the ISU shoshould determine
The type of ISU to which it is connected.
At + cgmi (get manufacturer name)
Motorola
OK
At + cgmm (get model number)
9500 satellite series
OK
At + cgmr (get Revision)
OK
Call processor version: inc0607
DSP version: inc0401, inc0400
NVM version: inc0400
OK
At + cgsn (get serial number)
901063131000002
OK

 

2) originating a data call
An example of how to make a data call is given below:
At + cbst = 6, 0, 1 (asynchronous modem 4800 BPS and irlp)
OK
At + Cr = 1 (enable reporting)
OK
Atd1234567890 (Dial remote modem)
+ Cr: REL async
Connect 9600 (call connected at DTE rate of 9600)

 

3) answering a data call
The ISU is capable of accepting mobile terminated data cals. The following is a sequence of commands that
Can be used to establish the connection.
Ring (indicates arrival of call request)
ATA (manually answer the call)
Connect 9600 (call connected at DTE rate of 9600)
To automatically answer a call, register 0 shocould be set to a non-zero value.
Ats0 = 2
Ring
Connect 9600 (call connected at DTE rate of 9600)

 

4) disconnecting a data call
At + cbst = 6, 0, 1 (asynchronous modem 4800 BPS and irlp)
OK
At + Cr = 1 (enable reporting)
OK
Atd1234567890 (Dial remote modem)
+ Cr: REL async
Connect 9600 (call connected at DTE rate of 9600)
<... Data transfer...>
<++> (Send escape sequence)
OK
ATH0 (hangup call)
OK

 

5) originating and disconnecting a voice call
An example of how to make and disconnect a voice call is given below:
Atd1234567890; (Dial remote phone)
OK (call connected; phone stays in command mode)
<... Conversation...>
Ath (hangup call)
OK