How Tplink routers modify LAN Port IP addresses

tplink router modifies LAN port IP address one: Cloud Router

Login to the Router management interface, click the routing Settings > LAN settings, as shown below.

LAN port IP setting defaults to Automatic (recommended), and is recommended to remain automatic when Lan-wan or WDS wireless bridging. In the use of Lan-lan cascade, LAN port IP settings are recommended to manually, modify the IP address and the main router in the same network segment and do not conflict, click Save. For example: The primary router's LAN port IP address is 192.168.1.1, and the LAN port IP address of the secondary router is modified to 192.168.1.X (x=2-254).

Tplink router modifies LAN port IP address two: new interface router

Login to the Router management interface, click the Advanced Settings > Network parameters > LAN settings, as shown below.

LAN port IP settings are automatically (recommended) by default, and can be modified to manual. The new interface router LAN port IP setting method is consistent with the cloud router.

Tplink router modifies LAN port IP address three: traditional interface router

Login Router management interface, click Network Parameters > LAN port settings, as shown below.

When you cascade a WDS wireless bridge or Lan-lan, you need to modify the LAN port IP address and the primary router's same network segment with no conflicting IP addresses. For example: The primary router's LAN port IP address is 192.168.1.1, and the LAN port IP address of the secondary router is modified to 192.168.1.X (x=2-254).

In Lan-wan cascade networking, you need to modify the IP address of the LAN port and the different network segments of the main router, for example, the LAN port IP address of the primary router is 192.168.1.1, and the LAN port IP address of the secondary router is modified to 192.168.x.1.

Note: Some traditional interface routers support Lan/wan Port IP address conflict detection, when the front-end network is detected to 192.168.1.0, LAN port IP address automatically modified to 192.168.0.1.

After the IP address modification of LAN port is complete, you need to log on to the router management interface with the modified IP address.