HP1000 Inkjet Printer LEDs flashing

If the printer has not been started, press thepower button () to start it.

Lift the paper tray.

Figure 1: Lifting the paper tray

Drop the tray and pull out the tray extension board.

Figure 2: Drop out Tray

Slide the paper width guide to the most lateral position.

Figure 3: Slide paper Width Guide

Put a stack of unused U.S letter or A4 plain white paper into the carton, short side facing front, print face upward.

Figure 4: Loading paper in the paper tray

Slide the paper width guide to the right to the edge of the paper and not bend the paper.

Figure 5: Slide the paper width guide to the right

　Workaround two: Open the Tray

Make sure the exit tray is open. You may need to press the power button () to clear the error.

Figure 6: Drop out Tray

　　Workaround three: Close the cartridge hatch

Make sure the cartridge hatch is securely fastened.

Figure 7: Close the cartridge hatch

View Ink Volume

To open the HP product software:

Windows XP: Click "Start"→ "All Programs" → "HP" → your HP products folder, then click on the Product icon (). Windows Vista or Windows 7: Click on the Windowsicon () → "All Programs" → "HP" → your HP products folder, and then click on the Product icon(). Note: Alternatively, you can open the HP product software from your computer desktop: Double click on the icon for your HP product().

The product software will open.

Double-click "Estimate ink Volume". The estimated ink volume for the printer will be graphically displayed.

Figure 1: Estimated amount of ink to be graphically displayed

Step Two: Replace the ink cartridge that is not enough

Open the cartridge hatch and wait for the pen to move to the middle of the printer.

Figure 2: Opening the cartridge hatch

Gently press down on the cartridge you want to replace, release it, and then pull the cartridge out of the slot.

Figure 3: Removing the old cartridge

Remove the new cartridge from the package and tear off the protective tape through the pink strip.

Figure 4: Removing the cartridge from the package

Slide the new cartridge into the slot until it snaps into place.

Figure 5: Slide the new cartridge into the appropriate slot

Insert the tri-colorcartridge () into the left slot toInsert the black cartridge () into the right slot

If necessary, repeat the above action on the other cartridges.

Close the cartridge hatch.

Figure 6: Close the cartridge hatch

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join