Port 5328 aggregation/load eth-trunk
16:48:28 | classification: H3C, | label: eth-trunk1 | font size port default is configured in the configuration before eth-trunk, first Delete the Default Configuration:
[Quidway] int g0/0/8
[Quidway-GigabitEthernet0/0/8] dis this
#
Interface GigabitEthernet0/0/8
Port default vlan 1
Bpdu enable
Ntdp enable
Ndp enable
#
Run the following command:
[Quidway-GigabitEthernet0/0/8] undo port default vlan
[Quidway-GigabitEthernet0/0/8] bpdu disable
[Quidway-GigabitEthernet0/0/8] undo ntdp enable
[Quidway-GigabitEthernet0/0/8] undo ndp enable
Configuration command:
[Quidway] int Eth-Trunk 1
Quidway-Eth-Trunk1
[Quidway-Eth-Trunk1] quit
[Quidway] int g0/0/8
[Quidway-GigabitEthernet0/0/8] et
[Quidway-GigabitEthernet0/0/8] eth-trunk 1
[Quidway-GigabitEthernet0/0/8] dis eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL Hash arithmetic: According to MAC
Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
Operate status: down Number Of Up Port In Trunk: 0
--------------------------------------------------------------------------------
PortName Status Weight
GigabitEthernet0/0/8 Down 1
Add other ports.
This article from the "Liu rate" blog, please be sure to keep this source http://liushuai.blog.51cto.com/3038219/1293765
