This article is intended for beginners of Huawei 3COM. It describes in detail how to save and configure Huawei 3COM to a vro and provides specific operation commands, I believe this article will give you a clearer understanding of Huawei 3COM.
How can we save the modified information after several commands are configured? By default, although the command can take effect immediately after it is executed, the command is saved in the "current configuration file", which is also the current-configuration. The configuration file disappears with the restart of the vro. If you want to thoroughly Save the configuration command, you need to save it to the saved-configuration. The command is as follows:
1. Save the current configuration to the saved-configuration, which is still valid after the vro is restarted.
Save
2. When a command configuration error occurs, we need to read the original saved-configuration and overwrite the current-configuration. In this case, we can execute
Reboot
The router restarts and reads the configuration of saved-configuration into the current-configuration file at startup.
TIPS:
If an error occurs when saving the configuration command, we cannot log on to the vro and enter the reboot command. You can manually unplug the vro and restart the vro。, which is the same as executing the reboot command.