Huawei Hybrid-vlan

Huawei Hybrid-vlan, three-layer switching, DHCP

Topology:

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/54/73/wKioL1SC8-yidmH5AAFnbzaDL48113.jpg "title=" 1.png " alt= "Wkiol1sc8-yidmh5aafnbzadl48113.jpg"/>

Demand:

1. Router End VLAN

2. Inter-switch VLAN transmission in hybrid mode

3.PC Get IP with DHCP

Ideas:

1.TheGateway of the PC is on the router

2. Configure Hybrid-vlan

3. Configure DHCP

Steps:

Router AR1:

[Huawei]vlan 10

[Huawei-vlan10]vlan Partitioning VLANs

[Huawei-vlan20]int G0/0/1

[Huawei-gigabitethernet0/0/1]un shut activating the interface

[Huawei-gigabitethernet0/0/1]int g0/0/1.10

[huawei-gigabitethernet0/0/1.10]dot1q termination vid Configuring the Encapsulation protocol type

[huawei-gigabitethernet0/0/1.10]ip Add 192.168.10.1 Configure IP

[Huawei-gigabitethernet0/0/1.10]un shut

[Huawei-gigabitethernet0/0/1.10]arp Broadcast enable Enable ARP (must be turned on)

[Huawei-gigabitethernet0/0/1.10]int g0/0/1.20

[huawei-gigabitethernet0/0/1.20]dot1q Termination vid 20

[Huawei-gigabitethernet0/0/1.20]ip Add 192.168.20.1 24

[Huawei-gigabitethernet0/0/1.20]un shut

[Huawei-gigabitethernet0/0/1.20]arp Broadcast Enable

Define the DHCP address pool (two types):

1. interface-based DHCP:

[Huawei]dhcp Enable

[Huawei]int g0/0/1.10

[Huawei-gigabitethernet0/0/1.10]dhcp Select interface

[HUAWEI-GIGABITETHERNET0/0/1.10]DHCP Server Dns-list 8.8.8.8

The VLAN10 member PC obtains IP in this way

2. address pool-based DHCP:

[Huawei]ip Pool V20

[huawei-ip-pool-v20]network 192.168.20.0 Mask defining network segments

[Huawei-ip-pool-v20]gateway-list 192.168.20.1 Defining gateways

[Huawei-ip-pool-v20]dns-list 8.8.8.8 Define DNS

[Huawei-ip-pool-v20]int g0/0/1.20                       

[HUAWEI-GIGABITETHERNET0/0/1.20]DHCP Select Global Defining Interfaces

The VLAN20 member PC obtains IP in this way

Switch LSW1:

[Huawei]vlan Configure VLANs

[Huawei-vlan10]vlan 20

[Huawei-vlan20]int E0/0/1

[Huawei-ethernet0/0/1]port hybrid Pvid VLAN 10

Add the E0/0/1 interface to Hybrid Port joins to Vlan10

[Huawei-ethernet0/0/1]port hybrid untagged VLAN 10

Add the E0/0/1 interface to the VLAN10 in a untagged way

[Huawei-ethernet0/0/1]int E0/0/2

[Huawei-ethernet0/0/2]port hybrid Pvid VLAN 20

Add the E0/0/2 interface to Hybrid Port joins to Vlan20

[Huawei-ethernet0/0/2]port hybrid untagged VLAN 20

Add the E0/0/2 interface to the Vlan20 in a untagged way

[Huawei-ethernet0/0/2]int G0/0/2

[Huawei-gigabitethernet0/0/2]port Hybrid tagged vlan 10 20

Let the data frame through the G0/0/2 interface, with the VLAN10 20 label

[Huawei-gigabitethernet0/0/2]int G0/0/1

[Huawei-gigabitethernet0/0/1]port Hybrid tagged vlan 10 20

Let the data frame through the G0/0/1 interface, with the VLAN10 20 label (from the trunk mouth function)

LSW2:

[Huawei]vlan                              

[Huawei-vlan10]vlan 20

[Huawei-vlan20]int E0/0/1

[Huawei-ethernet0/0/1]port hybrid Pvid VLAN 10

[Huawei-ethernet0/0/1]port hybrid untagged VLAN 10

[Huawei-ethernet0/0/1]int E0/0/2

[Huawei-ethernet0/0/2]port hybrid Pvid VLAN 20

[Huawei-ethernet0/0/2]port hybrid untagged VLAN 20

[Huawei-ethernet0/0/2]int G0/0/2

[Huawei-gigabitethernet0/0/2]port Hybrid tagged vlan 10 20

Configuration is complete.

Verify:

Set the PC to get address mode for DHCP:

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/54/75/wKiom1SC86HTtwBSAAHgDJ-koOU813.jpg "style=" float: none; "title=" 2.png "alt=" Wkiom1sc86httwbsaahgdj-koou813.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/54/73/wKioL1SC9DKQxtbLAANsc-UiqN0267.jpg "style=" float: none; "title=" 3.png "alt=" Wkiol1sc9dkqxtblaansc-uiqn0267.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/54/75/wKiom1SC86LguCDpAAHcO5TSgC0902.jpg "style=" float: none; "title=" 4.png "alt=" Wkiom1sc86lgucdpaahco5tsgc0902.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/54/73/wKioL1SC9DOxINHyAAI8KZJORRE540.jpg "style=" float: none; "title=" 5.png "alt=" Wkiol1sc9doxinhyaai8kzjorre540.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/54/75/wKiom1SC86KCbRDPAAI9XKX0L6Q851.jpg "style=" float: none; "title=" 6.png "alt=" Wkiom1sc86kcbrdpaai9xkx0l6q851.jpg "/>

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/54/73/wKioL1SC9DTjFkbPAAI8yWPpCKQ125.jpg "style=" float: none; "title=" 7.png "alt=" Wkiol1sc9dtjfkbpaai8ywppckq125.jpg "/>

DHCP configuration successful, verify data communication:

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/54/73/wKioL1SC9KTDDIOvAAP1CmqyL5g135.jpg "title=" 11.png "alt=" Wkiol1sc9ktddiovaap1cmqyl5g135.jpg "/>

Communication between C1 and C3 is normal.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/54/73/wKioL1SC9N_xOS-AAAPAcJeaCyE712.jpg "title=" 12.png "alt=" Wkiol1sc9n_xos-aaapacjeacye712.jpg "/>

Communication between C1 and C4 is normal.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/54/73/wKioL1SC9QyzVO2EAAP4yT9VHTc623.jpg "title=" 13.png "alt=" Wkiol1sc9qyzvo2eaap4yt9vhtc623.jpg "/>

Communication between C2 and C4 is normal.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/54/75/wKiom1SC9JqBAx3EAAPBXqdJq7E073.jpg "title=" 14.png "alt=" Wkiom1sc9jqbax3eaapbxqdjq7e073.jpg "/>

Communication between C2 and C3 is normal.

configured correctly, end.

This article is from the "share some personal experience" blog, be sure to keep this source http://hyang.blog.51cto.com/9415026/1587166

Huawei Hybrid-vlan