IDC Machine Room line quality test plan

1. Test node:

Beijing:123.206.*.*

Shanghai: 139.196.*.*

Guangzhou: 119.29.*.*

Shantou: 125.91.*.*

Hong Kong: 103.20.*.*

United States: 198.52.*.*

Test server: 103.38.29.239

2. Test time:

Each test time is not less than 6 hours

3. Test Project:

A, delay jitter, packet loss rate test.

b, network bandwidth test.

C, line quality testing.

4. Network topology:

5, Delay jitter, packet loss rate test:

Service node:

The test server runs 6 service-side programs, provides 6 service ports, 22001à22006, and logs the results to the log file archive.

Code:

[Email protected]/]# iperf-u-s-p 22001-i 5 >/usr/local/src/bj-test-$ (Date +%m%d%h%m). Log[[email protected]/]# I  Perf-u-s-p 22002-i 5 >/usr/local/src/sh-test-$ (Date +%m%d%h%m). Log[[email protected]/]# iperf-u-s-p 22003-i 5 >/usr/local/src/gz-test-$ (Date +%m%d%h%m). Log[[email protected]/]# iperf-u-s-p 22004-i 5 >/usr/local/src/st- test-$ (date +%m%d%h%m). Log[[email protected]/]# iperf-u-s-p 22005-i 5 >/usr/local/src/hk-test-$ (Date +%m%d%h%m). l Og[[email protected]/]# iperf-u-s-p 22006-i 5 >/usr/local/src/usa-test-$ (Date +%m%d%h%m). log

Start the service

Log directory

Port List

Test node:

Each test node runs the following command, respectively:

C:\BGPTest\iperf-2.0.5-win32\iperf-u-C 103.38.29.239-p 22001-b 500k-i 5-t 43200c:\bgptest\iperf-2.0.5-win32\iperf-u  -C 103.38.29.239-p 22002-b 500k-i 5-t 43200c:\bgptest\iperf-2.0.5-win32\iperf-u-C 103.38.29.239-p 22003-b 500k-i 5-t 43200c:\bgptest\iperf-2.0.5-win32\iperf-u-C 103.38.29.239-p 22004-b 500k-i 5-t 43200C:\BGPTest\iperf-2.0.5-win  32\iperf-u-C 103.38.29.239-p 22005-b 500k-i 5-t 43200c:\bgptest\iperf-2.0.5-win32\iperf-u-C 103.38.29.239-p 22006 -B 500k-i 5-t 43200

Client Health

Check the operation result of service node and test node output, the result is consistent, then the operation is successful!

6. Network bandwidth test:

Service node:

The test server runs the service-side program, which provides service 22008 ports.

Test node:

The test node runs the following command:

[Email protected]/]# iperf-c 103.20.194.179-p 22008-i 5-t 50400 >/usr/local/src/hk-bw-test-$ (Date +%m%d%h%m). log

Check the operation result of service node and test node output, the result is consistent, then the operation is successful!

7. Line Quality test:

Windows version:

Open the WinMTR software on the client and fill in the IP address of the tested side.

Parameter description:

Hostname: Each host IP or name to be passed to the destination server

Nr: The number of nodes passed through, with US servers going through 12 nodes, the first of which is the gateway of the local broadband provider

loss%: The percentage of ping packet reply failures, judging by the failure of that node (line), the server room or the International routing Gan LU

Sent: Number of packets delivered

Recv: Number of packets successfully received

Best: Minimum value for response time

AVRG: Average response time

worst: Maximum value of response time

Last: Response time for final packet

Linux version:

You can start the test by entering the following command on the client.

[Email protected]:~# MTR-TRNWC 50400 103.38.29.239

After the test is finished, the test results are displayed on the screen:

IDC Machine Room line quality test plan