software : Adobe illstrator
Tools : ellipses, scaling, rotating, gradient fills
The first time to write AI tutorial, do not know where to start, in the production of this logo when I use the most commonly used the simplest function, nothing special, but I make this logo a process, ok! Let's take a look at the final effect.
1, good, if you think you can then we go on, open ai (say, I use AI CS, I believe that the other version must also, FW can be) new document, using the Oval tool to draw a circle. With the rotation tool adjusted, the following figure is filled with radiation:
2, copy one on top (ctrl+c,ctrl+f), use the Zoom tool (Q) To reduce to the appropriate location, and use the fill. The following figure:
3, repeat the 2nd step and then copy a shrink, using a radial gradient fill, as follows:
4, in duplicate to reduce the fill, the following figure:
5, is not a little feeling pull, next we draw a good mark. Adjust to the appropriate place to fill the white.
6, copy one put on the top, fill. Then draw the shadow:
7, OK, we add a shadow to the bottom: