To give you illustrator software users to detailed analysis to share a realistic texture of the dagger effect of the tutorial.
2. Draw a rectangle with a rectangular tool;
3. Press A to switch to the hollow arrow tool, select the top left node, hold down the SHIFT key and press the right ARROW key to move the node.
4. Switch to the Add node tool, partially enlarge the view, add 2 anchor points as shown.
1. Transform node tool to convert the new node above to curve node;
2. Hold down the CTRL key to temporarily switch to the hollow Arrow tool, drag anchor point handle to adjust;
3. Select the leftmost node, press on the arrow keys, adjust to the entire rectangular height of about one-third;
4. Continue to use the Transformation node tool to convert the following new nodes;
5. Hold down the CTRL key to temporarily switch to the node editing tool, to the left horizontal direction to drag the left hand handle, forming a blade radian;
Note Do not drag the right hand handle to avoid dislocation degeneration.
1. Pull the new horizontal guide from the ruler
2. If the default is the state is locked, press Ctlr+alt unlock;
3. Press R key to switch to the rotation tool;
4. Press ALT to click on the center point of rotation;
5. Set the rotation angle in the pop-up dialog box;
6. Rotate the blade to the same angle.
Note: Before you rotate the guides and graphics, you need to select them!
1. Select the blade, hold down ALT and drag and copy 3 copies to spare;
2. Select two of them, stacked in the position as shown;
3. Select the two graphics to perform the predecessor object cropping.
Note: There are two kinds of clipping for the path-seeking, one is the predecessor, the other is the post. Just look at the relationship between the hollow and the solid in the clipping icon and see that the solid is the path that remains.
1. Select the original blade;
2. Fill gradually discoloration;
3. Press the G key to switch to the gradient tool and pull the gradient down the guide line from below.
1. Select the blade pattern cut through the path;
3. Use the gradient tool to pull the gradient as shown in the diagram;
4. Put the blade shape and the original edge of the graphic alignment stacked together.
2. Cut the path with scissors tool;
3. Use the gradient tool to pull gradually discoloration;
4. In layer 1, draw a blue rectangle as the background and lock the layer.
1. Select the trimmed path and press shift+ctrl+['s shortcut key to put it behind the blade;
2. Select the blade shape, press ctrl+2 to temporarily lock the object
3. Use the node Editing tool to adjust the node to form the thickness of the knife.
1. Use Rounded Rectangle tool to draw a rectangle with rounded corners;
2. Edit the gradient, pull the gradient with the Fade tool;
3. Copy rounded corner rectangle 2 times standby;
4. Select the initial rounded rectangle and fill it with white;
5. Perform the feather command under the effect effect menu
6. Fold a copy and the feathered shape to the position shown in the figure.
1. Trim the last copy with the Scissors tool;
2. Fill gradient, perform Gaussian blur 2 pixels;
3. Move three graphics to a suitable location;
5. Rotate the 35° to make the good blood trough;
6. Move the blood trough to the appropriate position of the blade;
7. Appropriate large and small deformation adjustment.
The production of the Hand protector:
1, press ctr+alt+2 unlock the original knife body.
2, select the composite path above the blade, press ctrl+2 lock.
3, copy the knife body, put it to the end.
4, cutting with scissors tool.
5, fill the K2 color, move to the position as shown.
1. Add 2 nodes by adding node tool.
2. Use the hollow Arrow tool to adjust the Bezier curve.
1, copy open path, with scissors trim.
2, fill the gradient, put the copy in the back, with the hollow Arrow tool appropriate adjustment node position, forming thickness.
3, the original open path selected fill a gradient color, forming a knife in the edge of the shadow.
4. Create a new layer 3 below the edge layer.
5, with rounded rectangle tool to draw a rounded rectangle, fill gradually color.
1, with measuring tools to measure the angle of the figure two points, in the Info Information Panel note the angle value.
2, select the rounded rectangle, in the Transfrom deformation panel input rotation angle, press ENTER to determine.
3, the rounded rectangle to move to the appropriate position.
1, with the oblique cutting tool drag and drop deformation, so that the hilt more in line with the visual effect of perspective deformation.
2. Copy the hilt 2 times to spare.
3, move one of the copies to the position of the diagram, and put it back.
Post shortcut key: shift+alt+[
1, in the Object/blend/blend options (Object/Mix/Mix options), select Step (steps), and set to 20.
2. Select 2 items and return to Ctrl+alt+b to make a mix.
3, the remaining copy pull a reverse direction of the gradient, and move to the appropriate position.
Note: The blending options are important! Otherwise you can't do it as shown in the diagram, pull the gradient color with the fade tool.
1, copy graphics, using scissors to intercept the right half, fill color to No, contour color is black, in the stroke panel set thickness and rounded corners.
2, select the path, in Object/path (object/Path menu) inside Select Outline Stroke (outer box path) of the command, the path into ordinary objects.
1, unlock the mixed graphics.
2, with the hollow Arrow tool to edit the node, so that the hilt more consistent with perspective law.
3, the transformation of a good path fill gradually change color.
4, with the hollow arrow tool carefully adjusted.
5, copy engraved line, fill gradually change color, move to the appropriate position with the hollow arrow tool carefully adjusted.
1, a new layer, with the pen tool to draw the shape of the figure, combined with the hollow Arrow tool to edit the node.
2, selected objects pull gradually color.
1, with the pen tool combined with the hollow Arrow tool to draw the shape of the figure.
2, the implementation of Gaussian blur, reduce the opacity of the object.
The production of the handle:
2. Draw a rectangle with a rectangular tool
3, fill the gradient, the contour color set to colorless
1. Select the Bending tool, double-click the icon on the toolbar and set the brush size in the dialog box that pops up.
2, with the auxiliary line, with the bending tool from the bottom to drag out two pits
1, with the Add Node tool in the center of the width of the rectangle to add a node (shown in the Blue box)
2, with the Hollow Arrow tool to select the top left corner of the node, hold down the SHIFT key to select the top right corner of the node
3, press the direction key several times, until as shown in the picture
4. Convert the middle node with the Transformation node tool, and drag the adjusting handle to make the curve smooth
1, with the smooth tool in the node path to drag, smooth path
2. Select the tool holder, rotate 35 degrees, and put it in the right position.
1. Copy the hilt figure to 3 copies
2, the second fill the new gradient
3, in front and back order, from the top down arrangement
4. Circle 4 Objects with lasso tool
5. Set the mixed step number to 20 in the blending option
6, the production of mixed
Note: The more you copy the object in front of it, the order of attention should be ordered.
2. Draw rectangle and ellipse with Rectangle tool and Ellipse tool respectively
3, select the 2 graphics in the path-finding panel dot collection icon
4, with the Add node tool at the junction of graphics to add nodes
1. Transform nodes with node conversion tool
2, rotate the figure 35 degrees, fill gradually change color
3, copy 3, in order, in the middle of the 2 refill gradually discoloration
1, the 4 graphics move stack put to the right place, make a mix
2, use the hollow arrow tool to make the path shape careful adjustment
3, new layer 7, with the pen tool to draw the approximate shadow contour, smoothing the path with the tool
1, the shadow of the image to perform a Gaussian blur 5 pixels
2. Change the layer blending mode to multiply (multiply the bottom)
So far, our dagger is done.
Well, the above information is small weave for you illustrator of this software users of the detailed rendering of the effect of the real-life of the dagger to share the full content of the tutorial, you see the users here, small knitting believe that everyone is now very clear the way to draw the bar, Then you should go to the small part of the above to share the tutorial on their own to try to draw a realistic dagger it.
