Integration Time Integration
Flicker is not generated when the light source period is an integer multiple of integration time
Integration time is the point in the behavior unit of the exposure time (exposure times), such as int Tim is 159, refers to the sensor exposure time is 159 lines,
Both represent the same meaning of the sensor exposure, but integration time is a relative concept, that is, in the unit of behavior, and the absolute time per row is related to the PCLK clock frequency and the number of PCLK (that is, the President) each line contains. While exposure time refers to the absolute duration of sensor exposure, the relationship between the two conversions is as follows:
Exposure time = Integration Time x President/PCLK frequency
Light source cycle should be understood as the energy cycle of the light source, is twice times the alternating current cycle (such as the AC frequency is 50hz, the light source energy period is 0.01s), the absolute time of step is equal to the energy period of the light source.
Flicker There are two cases, one is the progressive reset integral generation, that is, intra-frame flicker, the display of the image of the phenomenon of alternating light and shade, mainly because a frame does not peer although the int Tim consistent, but because the starting point of the integration is not the same, And the luminous intensity of the indoor artificial light source and the frequency of alternating current are periodic relationship, resulting in different lines of the light amount is inconsistent, resulting in the phenomenon of alternating shading, and if a frame occupies time is not an integer multiple of the energy period of the light source, can observe the flicker instability, the relative position of the shading line is constantly changing, As if the dark line is moving upward, if the absolute time of a frame is guaranteed to be an integer multiple of the energy period of the light source, the filiker can be stabilized;
Another situation is the whole frame reset integral mode, that is, video browsing, the flicker between frames, that is, the different frames of light and dark inconsistencies, the current elimination method is by adjusting the GLB gain value to improve
GLB gain is the global gain, is to adjust the overall brightness of the image gain value, and r/b/g gain is used in the concept of AWB, for the three primary colors are adjusted separately, is to adjust the color offset
Image sensor Integration Time