[Quartus II] [14.1 official Version]
The biggest change in the----14.1 version is the addition of 2 large series of device libraries: Max 10 and Arria 10.
These 2 major series according to AlteraChina Agent Chun Long Technology people said, is to play with Xilinx price war, where the MAX 10 series structure and performance and Cyclone IV is similar, the price is lower, and can be encrypted, integrated 2 configuration devices, Cyclone The V-series is the last generation of cyclone, with the combination of Cyclone and Max from Max 10, and later called Max, which is the structure of the FPGA-integrated high-speed configuration device.
Arria 10 Series Performance and Stratix V, the price is half of Stratix V or lower.
This version does not have an integrated Stratix series , the next version is rumored to be integrated because Stratix 102,015 years of mass production, using Intel's 14nm process, known as the latest U-series FPGA performance is one times higher than the same capacity, half of the price, low power consumption, is the world's first Le, RAM, floating-point hard multiplier more than 1GHz FPGA, Some of these models, which integrate 64-bit, 4-core, 2GHz-speed arm cortex-a53,altera, claim to be at least 5 years ahead of Xilinx. --in fact, it is Altera this time to embrace Intel's big legs , with Intel to get huge amounts of money smashed out of the production line FPGA, or Altera can not quickly get that big advantage!
Windows version:
Required Components:
Quartus II
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/quartussetup-14.1.0.186-Windows.exe 1.72GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/QuartusHelpSetup-14.1.0.186-windows.exe 322MB
Optional components:
Device Library (no full-load, which series of devices are used to install which series of device libraries)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arria-14.1.0.186.qdz 665MB (Arria II Device support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arriav-14.1.0.186.qdz 1.3GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arriavgz-14.1.0.186.qdz 1.9GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arria10-14.1.0.186.qdz 3.5GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/cyclone-14.1.0.186.qdz 463MB (Cyclone IV Device Support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/cyclonev-14.1.0.186.qdz 1GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/max-14.1.0.186.qdz 11MB (Max II, Max V D Evice support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/max10-14.1.0.186.qdz 289MB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/stratixiv-14.1.0.186.qdz 535MB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/stratixv-14.1.0.186.qdz 2.7MB
Modelsim AE (can not install AE version, recommended better Modelsim SE version 10.3c x64, can go to mentor official websiteDownloadSoftware again to eetop forum download crack)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/ModelSimSetup-14.1.0.186-windows.exe 1.1GB
OpenCL (can not be installed, in C languageDevelopment of FPGA tools for signal processing and scientific computing product development)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/AOCLSetup-14.1.0.186-windows.exe 189MB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/aocl-rte-14.1.0.186-windows.exe 9MB
DSP Builder (can not install, MATLAB plug-in, for signal processing product development)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/DSPBuilderSetup-14.1.0.186-windows.exe 67MB
Jneye (can not be installed, for FPGA high-speed transceiver of the PCB-levelSimulation andAnalysis, without the FPGA's high-speed transceiver, do not install this tool)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/JNEyeSetup-14.1.0.186-windows.exe 1.15GB
Soc (must be installed to develop SOC FPGAs, including the world's most powerful arm development tools, from armCompany's DS-5 installation package)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/SoCEDSSetup-14.1.0.186-windows.exe 1.83GB
Quartus II Programmer (recommended for factory burn-in line installation, developers do not install, because Quartus II has integrated this tool)
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/ Quartusprogrammersetup-14.1.0.186-windows.exe 291MB
Hard disk space: Fully installed Altera allDesign Kit v14.1 Approximately 24GB of free hard disk space is required for the hard disk or partition on which you want to install the software.
Linux version:
Required Components:
Quartus II
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/QuartusSetup-14.1.0.186-linux.run 2.2GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/QuartusHelpSetup-14.1.0.186-linux.run 323MB
Optional components:
Device Library (no full-load, which series of devices are used to install which series of device libraries)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arria-14.1.0.186.qdz 665MB (Arria II Device support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arriav-14.1.0.186.qdz 1.3GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arriavgz-14.1.0.186.qdz 1.9GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/arria10-14.1.0.186.qdz 3.5GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/cyclone-14.1.0.186.qdz 463MB (Cyclone IV Device Support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/cyclonev-14.1.0.186.qdz 1GB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/max-14.1.0.186.qdz 11MB (Max II, Max V D Evice support)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/max10-14.1.0.186.qdz 289MB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/stratixiv-14.1.0.186.qdz 535MB
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/stratixv-14.1.0.186.qdz 2.7MB
Modelsim AE (can not install AE version, recommended better Modelsim SE version 10.3c x64, can go to mentor official website to download software and then eetop forum download crack)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/ModelSimSetup-14.1.0.186-linux.run 1.1GB
OpenCL (can not be installed, in C language development of FPGA tools, for signal processing and scientific computing product development)
Altera SDK for OpenCL
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/AOCLSetup-14.1.0.186-linux.run 268MB
Altera SDK for OpenCL Linux x86-64 RPM
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/aocl-sdk-14.1.0-1.x86_64.rpm 289MB
Altera Runtime Environment for OpenCL Linux x86-64 RPM
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/aocl-rte-14.1.0-1.x86_64.rpm 594KB
Altera Runtime Environment for OpenCL Linux PowerPC RPM
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/aocl-rte-14.1.0-1.ppc64.rpm 465KB
Altera Runtime Environment for OpenCL Linux Cyclone V SoC TGZ
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/aocl-rte-14.1.0-1.arm32.tgz 691KB
DSP Builder (can not install, MATLAB plug-in, for signal processing product development)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/DSPBuilderSetup-14.1.0.186-linux.run 71MB
Jneye (can not be installed, for FPGA high-speed transceiver PCB-level simulation and analysis, without the FPGA high-speed transceiver, do not install this tool)
Jneye is not available for Linux operating systems. You must use the Windows operating system.
Soc (must be installed to develop SOC FPGAs, including the world's most powerful arm development tool, from ARM's DS-5 installation package)
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/SoCEDSSetup-14.1.0.186-linux.run 1.9GB
Quartus II Programmer (recommended for factory burn-in line installation, developers do not install, because Quartus II has integrated this tool)
http://download.altera.com/akdlm/software/acdsinst/14.1/186/ib_installers/ Quartusprogrammersetup-14.1.0.186-linux.run 360MB
Hard disk space: Full altera All design package v14.1 requires approximately 24GB of free hard disk space for the hard disk or partition where you want to install the software.
Aocl and Soceds are 2 relatively new software. AOCL is an Altera version of the OpenCL development package, developed in C language FPGA,AMD, Nvidia also has similar OPENCL tools, but with the GPU for parallel processing. Soceds is a tool developed by Altera to develop the SOC (that is, an FPGA integrated with Arm CORTEX-A9), which integrates the world's most powerful arm development tools DS-5 (customized from arm).
Note: Quartus 14.1 only has a 64bit version, that is, from the 14.1 version, Altera will no longer release the 32bit version of the software, but also with the 32bit system TX Remember to upgrade OH
Quartus 14.1 Version mainly supports the MAX10 chip and ARRIA10, so if you want to study these two series of chips, must be existing 64bit system, please pay attention to check your computer.
Quartus II Software DVD (Device support not included):
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/iso/Quartus-14.1.0.186-windows.iso
Quartus II Device Package 1 DVD (Cyclone and MAX series):
Http://download.altera.com/akdlm/software/acdsinst/14.1/186/iso/Quartus-14.1.0.186-devices-1.iso
#Win version installed Quartus II 14.1 Software:
# Step One: Use the quartus_ii_14.1 cracker. exe to crack the Gcl_afcq.dll file under C:\altera\14.1\quartus\bin64 (run quartus_ii_14.1 cracker. exe and click Gcl_ directly) Afcq.dll to the right of the Find button, and then check the Bin64 folder Gcl_afcq.dll, click "Open", continue to click "Next", Crack the first DLL encryption point, finally click "Finish" to crack the second DLL encryption point, the first step is completed. -When installed by default, the Gcl_afcq.dll path is under C:\altera\14.1\quartus\bin64).
#Step Two: Replace the xxxxxxxxxxxx in License.dat with your network card number (Select License Setup under the Tools menu in Quartus II 14.1, with the NIC ID below).
#Step Three: Under the Tools menu in Quartus II 14.1, select License Setup, then select License file and click OK.
#Note: The path name stored in the license file cannot contain Chinese characters and spaces, and spaces can be replaced with underscores.
#Remark: Quartus II has only 64-bit versions since 14.0, and this cracker has been validated under 64-bit operating systems in Windows 7 and 8, no problem! Windows XP and Vista because Microsoft gave up, so there is no authentication, theoretically 64-bit XP and Vista may be normal use, but still try to use 64-bit Windows 7 or 8.
After installing Quartus II 14.1 (Linux version), the method is as follows:
# >
Step One: the Crack_qii_14.1_linux.zip inside the libgcl_afcq.so and libsys_cpt.so files respectively extracted, replaced/root/altrea/14.1/quartus/ Linux64 inside the same name file, so the 2 so files inside the encryption point is all cracked.
#Step Two: Replace the xxxxxxxxxxxx in License.dat with your network card number (Select License Setup under the Tools menu in Quartus II 14.1, with the NIC ID below).
#Step Three: Under the Tools menu in Quartus II 14.1, select License Setup, then select License file and click OK.
#Note: The path name stored in the license file cannot contain Chinese characters and spaces, and spaces can be replaced with underscores.
#Under 64-bit operating system, by default, the installer generates a 64-bit desktop Shortcut (launcher), and if a few customers encounter an installer that does not automatically generate a desktop shortcut (launcher), create a new one manually on the desktop (in commands, point to/ROOT/ALTERA/14.1/ Quartus/bin/of Quartus).
June long technology recommends that customers use Altera's officially recognized Red Hat Rhel 6.x server version of the 64-bit operating system, Altera does not recommend the Ubuntu operating system can also, but install Quartus II is a bit cumbersome.
#Note: Quartus II has only 64-bit version starting from 14.0, this cracker has been verified under the 64-bit RHEL 6.5 operating system, no problem! 64-bit Rhel 5.x operating system because Altera will soon give up (14.0 now support 64-bit RHEL 5.x operating system, but 14.1 is not supported, starting from 14.1 In addition to support Rhel 6.x and added Rhel 7.x), So try to use Rhel 6.x server version of the 64-bit operating system.
For CPLD, FPGA and hardcopy ASIC designs, Quartus II 10.0 is the industry's premier software for performance and efficiency.
Version 10.0 supports Altera's high-performance new devices for bandwidth: Stratix V GS and GS FPGAs with integrated 12.5Gbps transceivers. The Stratix V GS FPGA is suitable for high performance, wideband applications. The Stratix V GS FPGA provides the industry's first precision tunable DSP module for high performance precision tunable digital signal processing (DSP) applications.
Future Quartus II software releases will also support partial reconfiguration features, with features such as Stratix V FPGAs that reduce power and cost, reduce board area, and increase logic planning efficiency.
Version 10.0 further plays the Quartus II Software's performance advantage:
In high-density designs, the compilation time is 2 to 3 times times faster than the most closely contested products.
The New Transceiver Toolkit provides real-time transceiver interfaces and bit-error-rate testing capabilities.
Extended fast recompile support, which further shortens compilation time and preserves timing better.
Enhance the qsp file to establish and maintain an in-house custom intellectual property (IP) library for design reuse.
The new Self-Service Licensing Center provides a one-stop shop for all the software and IP licenses you need.
Quartus II v14.0 Service Pack SP1 features:
Includes additional software and GUI enhancements
Support for Statix v devices (increased emulation support and incremental compilation support for DDR and Hssi features)
Final timing model for ep4se820, ep2ags190, ep2ags260 and all Cyclone IV E 1.0V devices
Provides a final power model for Cyclone III LS and Cyclone IV e devices
Continuing efforts to improve device performance and designers ' effectiveness, Altera Corporation (NASDAQ:ALTR) today released Quartus II software 9.0--industry-leading CPLD, FPGA, and hardcopy ASIC development environments. Version 9.0 fully supports Altera's transceiver FPGAs and hardcopy ASIC products. This latest version of the Quartus II development environment further enhances functionality to help customers bring Altera solutions to market faster with lower engineering inputs.
Quartus II software Arria V14.0 version ten to NM Best intellectual property (IP) core provides a comprehensive compleme NT to accelerate the design cycle. Altera Arria FPGA and SoC, have optimized its best of breed IP cores, including 100G Ethernet, 300G, Interlaken/interlak En lookaside, and PCI express®gen3 IP cores. When implemented on Altera Arria FPGA and SoC, these best of breed IP cores for FPGA industry's best performance
[Quartus II] [14.1 official version Update1]
The main supplement is the device library for Max 10 and thesoftware and IP patching. There is little change to the device family other than Max 10.
Windows Edition:
http://download.altera.com/akdlm/software/acdsinst/14.1.1/190/update/quartussetup-14.1.1.190-Windows.exe 1.75GB
Http://download.altera.com/akdlm/software/acdsinst/14.1.1/190/ib_installers/AOCLSetup-14.1.1.190-windows.exe 189MB
Linux version:
Http://download.altera.com/akdlm/software/acdsinst/14.1.1/190/update/QuartusSetup-14.1.1.190-linux.run 1.23GB
Http://download.altera.com/akdlm/software/acdsinst/14.1.1/190/ib_installers/AOCLSetup-14.1.1.190-linux.run 268MB
[Important UPDATE] [Quartus II] [14.1 official Version]