In-depth discussion on how to break through the limits of Netcom Routers

With the development of China's routing industry, the market demand for Netcom routers is also increasing. Here we mainly explain how the Netcom router breaks through the restrictions. The feature of shared Guard is to protect the privacy of users and hide the number of machines on which users access the Internet. This is something other shared Internet software and routers cannot do. When you use other Internet sharing tools, the monitoring system of China Telecom determines that several computers are online at the same time, and your account will be blocked, theoretically, this type of TCP packet Forgery cannot be prevented. The reason why the blocked machine can access the Internet is that the blocking equipment is not well-developed.

So the best way is that someone else cannot know how many Internet connections you have! The Netcom router uses network vanguard to monitor users. You can try to share the shield attack. You can buy a October-Year-Old Wangyou World magazine to see the detailed cracking methods on it.

Common proxy breakthrough Methods

1. Enter 192.168.0.1 in the address bar and press Enter. The admin user name and password will pop up to enter the vro configuration interface.

2. Click "LNA port configuration"> DHCP configuration> disable DHCP server: remove the check box and click Save.

3. Click "IP configuration" and change the IP address 192.168.0.1 to 172.16.0.1 or 10.10.10.1/50.50.50.1 in the IP configuration to bypass the 192. 168. -. -restrictions; you can test the new valid address on your own. Click Save.

4. At this time, because the computer and router are not in the same network segment, you must change the IP address of the local Nic to 172.16.0. 2 ~ 254). Or 10.10.10.2 ~ 254/50. 50.50.2 ~ 254 and other new IP addresses) subnet: 255.255.255.0 Gateway: 172.16. 0. 1. or 10.10.10.1/50.50.50.1 and other new IP addresses ).

5. Enter 172.16.0.1 or 10.10.10.1/50.50.50.1 in the address bar of the browser and press Enter. the user name and password will pop up and enter admin. enter the vro (if you cannot enter the route, you can "power off/power off" the Netcom router and restart the computer; and then try again) and click "LNA port configuration-DHCP configuration" to "enable the DHCP server:.

6. Note: 1. It is best to bind the local Nic MAC in the WAN configuration ---- MAC address control ). 2. If the connection is continuously dropped, check the network cable and crystal head between the ADSL and the WAN port of the route to change the quality. Check whether your computer is infected with viruses. Finally, you can configure ---- connection type --- enter the account assigned by the Netcom router and password --- point to connect to the Internet. The Netcom router is not upgraded; it is filtered on the server; the 192. 168.-package is not allowed. Because the routes on the market are generally 192. 168.-.-addresses. Therefore, you must change the IP address of the LAN port. The IP address may be 125.125.125.1/126.126.126.1.

We recommend that you use a route to test the best method for dual-route breakthrough. Avoid spending money on two vrouters, usually tp-link, more than 100 yuan. Use a vromodem to connect to the modem. Set the wan port to pppoe or dhcp or static based on your situation.) set the lan port to a fixed ip address, for example, 192.168.1.1 ). Connect the wan port of another vro to the lan port of the vro, set the wan port to fixed ip192.168.1.2), set the default route to 192.168.1.1, and set the lan port to fixed ip192.168.2.1 ). Connect to your LAN and set the LAN pc to 192.168.2.2-254.