Install beaglebone USB serial port driver in Ubuntu

You do not need to download the USB driver in Linux.ProgramTo re-mount the USB device, enter the following in the terminal window:
Sudo modprobe ftdi_sio vendor = 0x0403 Product = 0xa6d0

First, set the program. Enter minicom-S on the terminal. Go to the serial port settings to modify the parameters. Here there are two USB-to-Serial Port Devices, ttyusb0 is used for USB-to-JTAG, and ttyusb1 is a USB-to-serial port device.

Then the Angstrom System in beaglebone is entered.

Reset again. Enter root to enter the administrator account.