1 preparation:
Download the VM and centos installation Source
VMware-workstation-full-10.0.3-1895310CentOS-7.0-1406-x86_64-DVD.iso 2 virtual machine configuration-1 open virtual machine-2-3-4-5-6-7 can also use the default number of processors: 1-8 I modified the virtual machine memory to 2 GB-9-10-11-12-13 as needed. Allocated size-14-15 VM settings completed-16 final view 3 install centos7.0-1-2-3 in this step, some will report an error: You need to enter the BIOS to set. Some machines are in configuration, and some machines are in CPU configuration. Set inter virtual technology to enable. The old machine does not support this function. -4. After the installation is enabled, the installation interface is displayed. The selected part is displayed in the red box by default. Click Enter on the keyboard to continue-5. For convenience, you can select Simplified Chinese. If you are not familiar with Chinese, you can change it back. -6 depending on my habits, I prefer GNOME Desktop. Software-software selection-7 system-installation location-8 This partition is based on personal taste-9 installation information side, each item is set in the past, no setting will prompt. System-network and host name enable network-10 to start installation. You can perform two settings during installation. The installation process is very long and can be set slowly. -After 11, click restart-12 and then enter. Select accept license information-13 to provide a logon interface, which looks better than the 6.x series.