Find an external modem to prepare for HylaFAX research. However, this small modem brings a lot of trouble.
First, use faxmail for Windows v9.999 in Windows XP. Everything works, but it's hard to find the cracked version. The most amazing thing about faxmail is that the software can directly drive the modem without the modem driver. If you want to use this modem in Linux, it is not that convenient. Search for the Linux driver that actually reaches the online star 5600db, and find that all the drivers are for Windows. The answer to the phone call from Shida is that their products are not Linux-driven. No way, you will go back in one sentence. I had to be self-reliant and search for clues online. Finally, I found a clue in an old csdn post. First split modem, found modem chip is conexant, model is cx06827-11, conexant Ding name, support it Linux driver a little hope. So I found the driver in the http://www.linuxant.com/drivers/hsf/full/downloads.php. It supports hsfmodem. However, since the chips are the same, it can be used together. However, it is disgusting that the website provides two versions of drivers. One is a free driver and only supports up to kbps. One is the paid version and supports the maximum speed. My operating system is fc6, So I downloaded the modem driver under fc6. After the installation, use kppp to test the modem or use minicom to enter the AT command, and the light emits a pleasant red light. The installation of HylaFAX was not surprising, but it was a false alarm. However, it does not matter, mainly because the original source code package is not used. The installation process can refer to the http://www.wretch.cc/blog/ccy0411&article_id=4476225
