Install Ubuntu system with USB stick

To install Ubuntu with a USB stick, you need to make an Ubuntu USB disk installation disk, the most convenient and reliable way to make is to use the DD command under the Linux system, as follows,

sudo dd if=ubuntu-14.04.4-server-amd64.iso of=/dev/sdb bs=16m

The DF command can be used to view the device file name of the USB flash drive, but be aware that the is not/DEV/SDB4, but/dev/sdb.

The production of Ubuntu u disk installation disk, the information is as follows,

In order to install Ubuntu with a USB stick, you have to have a Linux, which requires a bit strange, but also easy to fall into the logic of the trap. Therefore, in Windows through the Win32diskimager tool software to make Ubuntu USB disk installation disk, more reasonable commonly used.

As shown, the use of Win32diskimager is very simple, select the image file, click the Write button. The installation disk produced by it is basically consistent with the use of the DD command system under Linux. In the ointment, the program opens with an error message that appears as shown. When the image file is selected, the main window is minimized. But this does not affect the use.

In addition, the USB drive installation disks made with UltraISO and universal USB installer have been problematic during the installation process. which uses the UltraISO soft disk through the production of USB flash drive, during the installation process will appear "Detect and Mount CD-ROM" error, the specific information is "Your installation CD-ROM couldn ' t be mounted. This probably means, the CD-ROM is not on the drive. If so you can insert it and try again. Retry mounting the CD-ROM ". The online introduction through a series of command operations like can solve the problem, but some trouble, give up trying. Using universal USB installer to make the USB flash drive, during the installation process will appear "Choose a mirror of the Ubuntu archive", rather than the normal local installation process, and eventually give up.

Ubuntu 14.04 installation process is basically the default, only when the disk partition based on memory and the situation of the hard disk configuration, such as.

After the installation of Ubuntu system, according to the "stand-alone Android development Environment (II)" The steps described in the relevant configuration, in order to build the Android6.0 build environment to prepare.

References:

Http://forum.ubuntu.com.cn/viewtopic.php?f=77&t=475389&view=next

Install Ubuntu system with USB stick