Installation, configuration, and use of linxu NX

1. Server Side

1.1 installation

First, you need to install the NX package on Linux. I am doing a test on centos6x. Run the following command to install the package.

$ Sudo Yum install NX freenx

1.2 Initialization

First switch to the root user, and then run the following command to initialize nxserver

#/Usr/bin/nxsetup -- install

1.3 Configuration

After initialization, modify the/etc/nxserver/node. conf file

# Enable_passdb_authentication = "0"

Change

Enable_passdb_authentication = "1"

1.4 start the service

$ Sudo/etc/init. d/freenx-server restart

2. Client installation and configuration

2.1 first download from http://nomachine.com/. here I download 3.520.nx Client for Windows.

2.2 refer to http://www.kernelhardware.org/how-to-setup-freenx/to configure NX Client for Windows.

Replace the key with the content in the/etc/nxserver/client. id_dsa.key file on the server.

2.3 After configuration, you can use the client to connect to the NX server.

Reference: http://www.kernelhardware.org/how-to-setup-freenx/