Tip: The content of this article is intended for your study and reference, Lenovo does not recommend you to expand, upgrade, replace hardware devices, such operations are risky. If you have the above requirements, we recommend that you contact the nearest Lenovo service network to seek professional support.
First, the introduction of such a display of the base of the installation method:
1, the first to remove the base, the monitor screen facing down flat, pay attention to avoid a foreign body bad screen. As shown in the logo, you can manually also use screw screwdriver to screw down, you can take down the entire base, and remove the base after the effect;
2, independent base picture display, as shown:
3, the following figure identified the screw position, you can screw screws through the screwdriver, then the base on the part of the red circle on the position of the plastic cover can be taken down, remove the effect of plastic cover, as shown in the diagram:
4. After removing the plastic lid, you can see the metal site as shown, the site is fixed by 4 screws, of which 3 screws should be the fixed metal chassis 3 screws, as shown in the figure:
5, then this type of display, the base part of the fact that there are three parts together, as shown:
Second, the display base installation introduction, the monitor base is fixed to the display bracket three raised pillars, and the hand screw screws can be tightened.
