Youxun DI-504 wireless router has IPcam function, that is, the Network Camera, I will introduce you to how to configure youxun wireless router and Network Camera remote access.
I. basic configuration of youxun wireless router (1) First Login youxun wireless router, set the LAN address of the DI-504, the default address is 192.168.0.X, the gateway is 192.168.0.1, You can freely configure the LAN IP address, IPcam must also be in the specified CIDR block.
(2) When configuring wireless network settings, you must be clear about the wireless network settings. Here we will not be too long-winded, it is nothing more than enabling the wireless network, setting the SSID, selecting the channel, and setting the wireless network key.
Ii. Network Camera Configuration
(1) The default IP address of IPcam is 192.168.0.99. Set the IP address of the computer to the same network segment and enter 192.168.0.99 In the IE browser. If the IP address of IPCam has changed, you can search by the installation wizard in the installation disc. If the Installation Wizard cannot find IPCam, reset IPCam directly. Www.2cto.com (2) assume that the IP address of IPcam is 192.168.0.99. log on to the IPCam page. The admin password of the initial user is blank. click configuration to set parameters. (3) Click "Network" to configure the lan ip address. Enter the IP address, Subnet mask, Default roter, and the port for managing web pages. The Default value is 80. You can modify the IP address by yourself, click Save IPCam to automatically restart.
(4) the wireless network settings are the same as those above. You only need to select one more wireless password.
Follow the steps above to complete the network camera settings. users who need remote management can use the Internet to remotely manage the Network Camera by setting the Network Camera in DMZ or virtual server. This article is from