IPhone development environment installed in Non-Apple laptops (on)

IPhone development environment installed in Non-Apple laptops (on)

After a long time, I finally installed the Mac operating system and xcode integrated development environment on my Samsung notebook. I would like to celebrate it first, because it is really not easy ~~

In addition, there are many images in this article ~~

The following describes the procedure in detail (It is strongly recommended that you do not install it in a virtual machine. This is too slow. In my previous installation experience, it should be at least 10 times slower! So if your laptop supports Mac installation, simply install it.):

1.

First, we need to install the Windows operating system.

2.

Then go to the Windows system. First, we need to determine whether our CPU can install the MAC system, mainlyThe Instruction Set must support commands sse1, 2, and 3. We can use the CPU-Z software to test the instruction set.:

In the command set column, we can see that the cpu Of My Samsung notebook supports sse1, 2, and 3 instruction sets (To ensure the installation is successful, the CPU is preferably intel, and the graphics card is preferably NVIDIA)

3.

Download the paragon Partition Manager partition software to partition the hard disk.Is my partition:

Local disk C is a Windows system disk, local disk D is my data disk (my documents, photos, music, etc.), local disk is my Linux system disk, the bottom unallocated is the partition where I want to install the MAC system. So after the MAC system is installed, I will have three systems (Windows, Ubuntu, and Mac OS ):

Here we use the hard disk installation method, that is, first write the Mac installation system into a partition, and then use it to install the system. Therefore, we need to split the last unallocated partition into two parts. The previous one can be divided into 5 GB (the MAC system disk is also 4 o'clock), and the rest will be used as the MAC system. Note that the two partitions must be in the Apple HFS format! (The format ID is 0xaf, as indicated by the mouse ):

After the partition is completed:

Note that the last two are purple, indicating that they are apple HFS file systems.

4.

Next, we need to write the downloaded MAC system to the 5g system (that is, the edisk). Here I choose iatkos_l2.iso, which is based on Mac OS 10.6.3.LeopardVersion. It is best not to select the official Apple system. You should select a version that has been cracked by others and can be installed on x86 machines!

Then we will useHard Disk installation AssistantThis small software writes iatkos_l2.iso to the edisk (the hard disk installation assistant can be found in the link at the end of the article ),Remove the three check boxes., As shown in:

Click Start to write.Note: After writing data, the hard disk installation Assistant Interface will not respond as if it was dead. In fact, don't worry, just wait.

After the write is completed:

We can see that the operation to convert to the AF flag is fail, but it doesn't matter, because we have already specified it as the AF flag.

5.

After writing, we also need a tool for us to choose where to start the system.Bootthink(Bootthink is also in the link at the end of the article ):

6.

Now, all preparations are completed after the installation. Now we need to install the MAC system (we also need to use a mobile phone ).

Restart the system,Enabling ahci in BIOS is critical.! If ahci is disabled, the system will be stuck:

Still waiting for root device! (Skip this step if ahci is enabled)

ThenSelect the second boot think:

Move the left and right keys to iatkos S3 (this is the MAC system in the 5g drive we wrote earlier). Note that do not press Enter!

Press F8 to enter the command mode:

Enter-V and press Enter.

In this way, the MAC system starts to start and install:

If everything is normal, the installation interface will be displayed:

Select Simplified Chinese:

Continue:

Select the partition where we want to install the MAC system (note that it is not the 5g partition !)

Start installation:

The installation process is fast, about 20 minutes. After the installation is complete, the 5g partition is useless.Restart and use the same method to move the left and right keys to the partition where the MAC system is installed:

Similarly, enter-V and press Enter:

Beautiful first startup interface (it is particularly worth mentioning that the first startup after Mac system installation will have a very cheerful music !) :

Welcome interfaces in various languages:

The iconic "X"

Then, the settings are started:

Keyboard, usually the first one:

Data transfer:

Select the Internet access method:

Enter the ID registered on the Apple website. You can skip this step:

Create a user name. Note that the password here is the root password:

Select image:

Select the time zone:

Okay, Mac is installed. Let's look at the iconic one:

The iconic Leopard:

Frequently-seen desktops:

The legendary iTunes:

Dashboard:

Finder:

Safari:

Terminal:

Task Manager for Mac:

We can see that Apple did not recognize my CPU:

However, one major defect of black apple is driving! Apple's official drivers are only for its own apple, so black apple like ours needs to find its own MAC driver, which is very troublesome! Generally, no mac driver is available! Like me, there is no video card or NIC driver. I am working on a solution!

Finally, let's take a look at my configuration (Master Lu ):

The memory is only 2 GB, but it runs smoothly.

In the next article, I will introduce how to install xcode IDE.

The software used in this article is attached:

Http://download.csdn.net/detail/htttw/4439016

Done!