Cause analysis
In this case, you can go to the Apple Store to consult, and if it is like you said that the situation there are two kinds of headphones bad contact, or a problem with the headphone hole, the former can try to plug headphones into the headset, while playing music, twisting plug into the headphone hole connector. If the problem is the latter, please go to the professional repair shop for maintenance
Solution sorting
1. First you take the shell down, to make sure that there is no enclosure under the obstruction. Many users because of the reason for the painting door to their beloved iphone5 used a full package of protective shells, but this also led to a part of the protection shell is not designed so standard, or protective shell is too thick, resulting in headphones have no way to complete the insertion.
2. Determine in the bare-running state, all the metal material into all, iphone5 new headphone jack is relatively, very tight, so you have to vigorously insert the line.
3. Clean headphone hole
Step one: Use cotton stick to drink alcohol, squeeze clean, not too wet, put the cotton stick into the headphone hole to turn and pull out, repeated several times. Be careful not to break the cotton stick too hard.
Step two: or with a hair dryer, on the headphone mouth away from the blow.
Step three: After cleaning, plug in the headset to try, is not a good point?
4. Handle Headphone connector
Step one: Sometimes the headset is not the phone headset is not the reason, but headphones on the connector. Do not plug the headset to the end, plug in the general test sound will be better, if it is, to change the headset to see whether the plug is good?
Step two: Some headphones and mobile phone interface is not corresponding to the ground, the order of the channel line is not the same result of headphones contact, should be replaced headphones try.
5, processing mobile phone internal headset interface
3. If it can't be solved, congratulations on your winning! You can try it with a different headset, or change a hand to determine if it is a quality problem. If it is a mobile phone quality problem, you can go to the local Apple after-sale repair or replacement, the mainland and Hong Kong version of the scope of the UNPROFOR.