IPhone6 plus phone how to maintain extended IPhone6 use time method

1. Do not rush to charge before the new machine starts

The new machine to start the proposal is not anxious to charge, normal use of electricity to the screen tip 10% need to charge. Then shut down the computer and charge it once. The first time to use the remaining 10% and fully charged for about 4 hours.

2. Insert the data line first, then plug in the socket

First plug the data cable into the Apple 6 charging connector, then plug the two holes into the socket.

3. Pay attention to the ambient temperature when charging

Ambient temperature between 0 degrees to 35 degrees is the IPhone6 battery use and storage of the appropriate temperature, 22 degrees is the best temperature. Note that the Apple 6 battery is not easy to rush into the electricity at low temperatures.

4. Determine whether the shutdown charge is full

In order to prevent overshoot, if you continue to plug in after the battery will automatically discharge a small portion, and then charge. For equipment safety, full power or timely disconnect the charger for good.

5. Keep the iphone free breathing when charging

If you do not remove the protective sleeve when you recharge the iphone, it will generate too much heat and thus affect the battery capacity.

6. Make sure your computer is on when you charge your iphone

Make sure your computer is turned on when you use your computer's USB to recharge your iphone. If the iphone is connected to a computer that is shut down or asleep, the iphone's battery may be depleted.

7. One months after the full charge and discharge once

Use full charge and discharge for one months or so. The battery is used for automatic shutdown, then the shutdown is fully charged once.