IT elites tell you how to enter the vro Management Interface

It's easy to tell you how to enter the router management interface. Let's take a look at the answers from experts! I saw a question raised by a netizen on the forum. I would like to share with you this opportunity. The following is a question raised by this user: How can I enable another machine to access the Internet through a router? I used my own computer to access the Internet through a monthly adsl package. Later, my friend wanted to connect to the Internet and used a vro. Both the modem and the vromodem are here. However, the current situation is: If I enable the Internet first, A friend automatically connects to the Internet when he starts the system;

However, if a friend opens a machine to access the Internet first, I cannot automatically connect to the Internet here. If I make a dial-up connection, I will be prompted. The phone is busy, but I cannot connect to the Internet, in this way, even if I turn off the modem for one minute and re-open it, it is often that he first connects to the Internet, and then the system will still prompt me; the phone is busy ;, therefore, I can only unplug his network cable from the router and plug it in after I connect the network.

There is a lot of trouble entering the vro management interface! Is there a way to solve this problem? It is best that I can automatically connect to the Internet, and I can also automatically connect to the Internet. I use a vro of XXX. The ip address is 192.168.0.1! Thank you! Question added: Thank you. The question is, I don't know which changes should be made or where to change them.

The IP address is 192.168.0.30, And the subnet mask is 255.255.0. The default gateway is 192.168.0.1. In the attributes of the sub-machine's network neighbor:; broadband dialing; In the attributes, the IP address is automatically obtained .; In the local connection, the IP address is specified as 192.168.0.1, And the subnet mask is 255.255.0. The default gateway is blank.

I tried to change my IP address to 192.168.0.100 and set the default gateway to 192.168.0.1. As a result, my friend's machine could not access the network. I don't know how to set it; what is the current situation of dial-up on a router ?; Broadband dial-up; I cannot find the place where you can enter the management name and password. The purchased vro is more than 100 yuan and has five ports.

We have adsl dial-up items on our respective computers. Enter 192.168.0.1 to open any page. In addition, after I change everything back to its original state, I reinstalled the firewall. As a result, when I access the Internet, my friend's machine can only go to qq, but cannot open the webpage, at the same time, my firewall logs show the IP address of a friend's machine; trying to connect to a port of the local machine... this operation is rejected ;.

I must turn off the firewall to open the webpage normally. Q: I think this user said this situation is particularly interesting. Based on the details of your two questions, I personally think that although he has attached a vro, he didn't use it at all, or it only uses the four LAN ports of the vro. Why? Because his vro has not set a dial-up, the functional interface of the vro has never been opened.

It is a computer-dialing DSL. If a router does not set PPPoE dialing, it cannot log on to the Internet. At the same time, it is absolutely impossible for the computer connected to the vro to successfully dial, because the vro cannot identify the PPPoE data packet, that is, it cannot extract the IP address in the PPPoE data packet. Since the dial-up is successful on the computer connected to the router, I can say with certainty that the modem is definitely not connected to the WAN port of the router, but to the other four LAN ports, or a vro is actually a vswitch or hub.

How to enter the vro Management Interface: In addition, If I enable the Internet connection first & #8230; & #8230; & #8230; & #8230; as a result, a friend's machine cannot access the Internet .; Obviously, his friend has been using his machine as a proxy to access the Internet. That is to say, the netizen is a host and his friend is a client. If the IP address of the host changes, or the firewall is installed, his friend's computer will not be able to access the network.

If his friend dialed the phone number first and the current relationship is reversed, he will definitely not be able to access the Internet. So he needs to unplug his friend's network cable and restore the primary-secondary relationship to access the Internet. In fact, a vro is not always used for Internet sharing. You can use some proxy software to achieve Internet sharing. The physical connection is just like this.

After proxy software is used, any machine in the LAN can dial up to access the Internet. After a computer is successfully dial up, other computers can share the Internet through a dial-up computer, at this time, the dial-up computer serves as a server. When the dial-up computer is disconnected from the Internet, the work of the server can be switched from another computer to the Internet.

How to enter the vro Management Interface: In view of the poor knowledge of the vro, I will introduce how to enter the vro management interface. Generally, we purchase a vro. The package contains a specification. The specification or the device body indicates the default IP address of the vro, for example, 192.168.0.1, then we need to set the IP address of the computer first.

 

How to enter the vro Management Interface

How to enter the vro Management Interface: First right-click a network neighbor, and then click Properties in the local connection, double-click the TCP/IP to enter the modification of the local IP address. Because the IP address segment of the router is 192.168.0.1, the IP address of the computer must also be set to the same IP address segment. The following is set to 192.168.0.2, and the sub-mask is usually 255.255.255.0, the gateway must point to the IP address of the router, so it is set to 192.168.0.1.

DNS varies depending on the bandwidth type and the carrier's DNS. Because DNS can be set on the vro, you can leave it empty or enter the IP address of the 192.168.0.1 router directly. After entering the information, press OK! After the IP address of the local machine is modified, connect the network cable connected to the computer to the LAN port of the router. Here, the router generally has a WAN port and 4 ~ Eight LAN ports, WAN ports are connected to modem, and other LAN ports are connected to the computer.

 

How to enter the vro Management Interface

How to enter the vro Management Interface: after the connection is complete, open the browser on the computer and enter the IP address 192.168.0.1 of the vro in the address. the browser will display a window where you need to enter the user name and password, enter the correct information to enter the management interface. If not, it may be that the default IP address of the router has been modified. At this time, you can use the restore key to restore the factory settings. The restore key is usually next to the power interface and there is a small hole in it, use a toothpick to hold it down for a few seconds.