Key points: connect to and set up a wireless router in D-Link wireless router settings

I 'd like to introduce you to D-Link wireless router settings. Many people may not know about D-Link wireless router settings. It doesn't matter. After reading this article, you will certainly have a lot of GAINS, I hope this article will teach you more things.

Connect to a wireless router

1. The order of connecting to a wireless router is as follows:

Internet (adsl/gehua broadband) → broadband cat → wireless router → computer

2. Pay attention to network cable usage during connection

A straight-through line (two RJ45 connectors have the same line arrangement order) and a cross Line (the order of the two sides is different). The D-Link wireless router is set to "different lines of the same device, the cables of different devices are the same. However, because most routers and switches can automatically identify the network type, I will not repeat it here. This is because there is no chance of a problem.

3. D-Link wireless router settings

The indoor effective range of the wireless router is 100 meters, but this is only the ideal value. If the distance is 20 meters, the signal passing through the wall will definitely affect, just as the signal from the toilet will be weaker, because the wall of the toilet has a water layer. I also heard that the network will be disconnected immediately when a microwave oven is opened, but I have never tried it.

Set up a wireless router

The default IP address of the wireless router is 192.168.0.1. Open IE or my computer and enter the IP address of the router in the address bar to enter the logon screen. The default administrator username is admin and the password is blank. Use the "setting wizard" to quickly and conveniently set up a vro. Click "online setting wizard" to start the setting wizard.

1. Set your new password

Nothing to say

2. Select Your Time Zone

Nothing to say

3. Set Internet connection

Because the bandwidth type of the household is different, the setting will be different. If you are an Internet user such as ADSL, you should enter the PPPoE setting interface and enter the PPPoE account and password, in this case, the "set Dynamic IP Address" interface will appear. Fill in according to the bandwidth type of your students.

4. Set wireless connection

Here there are four blank fields: wireless network ID (SSID): Give your own wireless network a name, also use the default line to own a personalized name. Channel: The default value is Channel 6, which does not need to be changed unless otherwise specified. I used 6, but now it's okay to change it to 7. WEP Security Mode: adds a password to your wireless network. Here, you can select the password switch or the complexity of the password after it is enabled. If you don't want your wireless network to be stolen by your brother next door, add a password. If you select 64Bit, you need to enter a 10-bit password, 26 for bit, and 64Bit is enough. WEP password: enter a password of at least 10 characters.

5. reactivate

After the configuration is complete, the D-Link Wireless Router setting is not difficult.

1. About Cisco router ports
2. D-Link DI-7000 management router: reject office battles
3. D-Link DI-624 + A wireless router WIFI settings
4. D-Link DAP-1360, the leader of the wireless routing set
5. Application viewpoint: vro Basics