LAN connection test tools are essential for creating a dormitory Network

LAN connection test tools are essential for building a dormitory network. When you search for keywords for building a dormitory network, they are all necessary to learn about LAN connection test tools for building a dormitory network. Therefore, this article should be able to meet the needs of most netizens.

Knowledge about building a dormitory Network: It is often used to check whether computers can communicate with each other. Its command format is: ping the destination address. [parameter 1] [parameter 2]... the destination address is the IP address, domain name, or computer name of the tested computer. Main Parameters include:
◆ A: Resolve the host address;
◆ N: Data: Number of test packages sent. The default value is 4;
◆ L: value: the size of the buffer to be sent;
◆ T: continue to run the ping command until you press ctrl + c to terminate.
◆ Ipconfig, which is generally used to view the IP address of the local machine and other information:
◆ Its command format is ipconfig [/parameter 1] [/parameter 2]...
◆ A11: displays all the details related to the TCP/IP protocol, including the host name, node type, whether IP routing is enabled, the physical address of the NIC, and the default gateway;
◆ Batch [text file]: saves the test results to the specified text file for viewing item by item;
◆ Renew: if the computer enables DHCP and uses the DHCP server for configuration, use the ipconfig/renew command to refresh the lease.

Another Command similar to ipconfig, winipcfg, is used to build a dormitory network. It runs in a windows environment and has a graphical interface. Netstat: displays the Protocol statistics and the current TCP/IP connection. The command format is netstat [-parameter 1] [-parameter 2].
◆-The command displays all connections;
◆-R: displays the route table and active connections;
◆ The-e command displays the Ethernet statistics;
◆-S: displays statistics of each protocol;
◆-N, the address and port number cannot be converted into names.

Knowledge about building a dormitory Network: nbtstat is a useful tool for resolving NetBIOS name resolution problems. You can use the nbtstat command to delete or correct a pre-loaded project. Its command format is: nbtstat [-parameter 1] [-parameter 2] ......
◆-N indicates the name of the program registered locally on the system by the server or the redirection;
◆-C: the NetBIOS name cache is displayed, including the address ing of other computer names;
◆-R clears the name cache and reloads it from The Lmhosts file;
◆-RR releases the NetBIOS names registered on the WINS server and refresh their registration;
◆-Aname: Execute the NetBIOS adapter STATUS Command on the computer specified by name. The adapter status command returns the local NetBIOS name table of the computer and the Media Access Control Address of the adapter;
◆-S lists the current NetBIOS Sessions and their statuses, including statistics ).

Knowledge about building a dormitory network Q: the operating systems of both computers are Windows 98. Why can't I see each other in my network neighbors? A: The following problems may occur. 1. Check whether the NIC Driver is correctly installed? 2. Are TCP/IP and netbeui protocols installed? 3. Are IP addresses in the same CIDR Block? 4. Are the working groups the same? 5. Is file sharing enabled? 6. Are there any faults in the network line? Are they made according to the standard?

Knowledge about building a dormitory network Q: two computers, one for windows98 and the other for windows2000. Why can't windows2000 computers access resources of windows98 while windows98 computers cannot access 2000? I have already set up sharing in 2000. A: 2000 can access 98, which indicates that the Protocol, working group, and network cable are all correct. You only need to open A new account in 2000 account management for 98, and then you can use this account to log on to 98, let's take a look.

Q: Why can't my workstation be connected to the Internet using sygate as an agent? A: First, you must ensure that the sygate software has been correctly installed on your server. Then, you must specify the gateway as the IP address of the sygate host installed on the workstation and set the DNS, for more information, see the sygate tutorial.

Q: I still use sygate as an agent and have four machine workstations. Why are there always two workstations that cannot access the Internet? But this machine is not fixed. Sometimes this machine, sometimes that machine? A: Obviously, your sygate series number only allows three users to access the Internet. The solution is to find more users (or unlimited) series number and reinstall it.

Knowledge about building a dormitory network Q: I want to play a combat game, but the game installation prompt does not find the relevant agreement? A: Some games require TCP/IP protocol support, while others require ipx protocol support. Check which Protocol your game supports, it is recommended that you install these two protocols on your computer, so that you will have no worries. Q: When netmeeting is used, netmeeting on the workstation cannot be switched to the host. Why? A: Check whether the network is connected, and check whether the firewall such as Skynet is installed on the host.