Lei Ke wireless router How to set up
Lei Ke Wireless Router setup method is as follows:
The first step: the network from the modem to plug into the router's WAN port, and then use network cable to connect two computers with the interface, plug in the power of the router.
Step two: Open a computer, Network Neighborhood--attribute--Local connection--attribute--TCP/IP protocol--attribute, set IP address to 192.168.1.100, Gateway is 192.168.1.1 (router's default gateway address), subnet mask 255.255.255.0. When set up, open the browser, in the Address bar to enter the router's administrative address (this address can be obtained from the router's instructions) 192.168.1.1, enter the default admin username and password, here are guest.
The third step: After the successful landing can see the current status of the router, the first landing router will eject the Setup wizard. Select the second PPPoE (ie ADSL account) virtual dialing, and then click Next.
Fourth step: Fill in the telecom company that get the account password click Next prompt to set the completion. Click the Exit End Setup wizard. Now back to the Router Management homepage, click on the connection to dial, the success of the "connection" two words into a "disconnect."
Fifth step: Now complete the router to ADSL dial-up settings, the following set the router's basic parameters (after viewing, all settings are default, so this part can be omitted without operation)
1. At the WAN Port Settings tab Click, set connection mode, select Automatic connection.
2. Then set the DHCP server (the second option for the LAN Settings tab DHCP).
The sixth step: all computer boot, set IP address for automatic acquisition: Network Neighborhood--attribute--Local connection--attribute--TCP/IP protocol--attribute.
The seventh step: Close the page after the completion of the Web site can be opened, all computer boot can be directly hung QQ to see the Web page, and so on, no longer like the need for a broadband dial-up connection before the online.