VISTA, WIN7, and WIN8 installs the AHCI method:
Download AHCI Driver and unzip, double-click Setup to install
Third, XP under How to install AHCI, divided into two types of installation, according to the model to choose the corresponding installation of the scheme
Old model Solutions
Take IdeaPad Y460 as an example:
1. Device Manager screenshot When AHCI driver is not loaded (chipset driven installed)
2. Download AHCI driver and extract the AHCI folder
3. Reboot, modify the BIOS under the SATA mode of operation is AHCI option, the following modified hard disk mode method is "AHCI", some are enabled or disabled (the different model BIOS in the HDD mode modification location and method slightly different)
4. Enter the system boot complete when prompted to find the New Hardware wizard, click "No, temporarily not", and then click Next
5. Select "Install from list or specified location" and click Next
6. Point to Path: After extracting the AHCI driver root directory
7. Installation success: Click Finish
8. Reboot prompts, click "Yes" to restart the computer
9. The following figure is the Device Manager interface after the installation is complete
After 8 Series (Intel 7 chipset)
1. Open Device Manager. Right-click the standard dual-channel PCI IDE controller to select the update driver.
3. Choose to specify the installation from the list
4. Select "Do not Search"
5. Click from "Disk Installation"
6. Choose to download a good driver "Iastor.inf"
7. Select "AHCI Driver for Intel 7 Series chipsets" next
8. Windows compatibility prompt, click "Yes"
9. Windows prompts reboot, click "Yes"
10. Reboot into the BIOS, change the hard drive interface mode to "AHCI", after the installation of the Device Manager screenshot as follows:
