Let the hard drive get rid of the five weird harassment

Reading the information on the hard drive or writing it to the hard drive is almost the "compulsory course" we have to do every day. However, in the process of frequent access to the hard drive, we will occasionally find some strange "harassment" hit the hard disk, in these strange "harassment" in front of many friends often appear helpless, it is obvious that this will seriously affect the high efficiency of the hard disk. To this end, this article will be some very easy to encounter the strange "harassment" phenomenon summed up, and for each "harassment" pulse to ask the medicine, in order to improve the working efficiency of the hard disk!

1, hard disk space strange smaller

My friend recently reinstalled the Windows XP operating system on his computer, after the installation he looked at the hard disk C partition of the remaining space, found about 65% of the allowance, but after a period of time after he looked at the rest of the hard disk C partition space, found that only 50% less than the allowance, And he was sure that during this period of time did not save any files to the hard drive C partition, then why did the hard disk space suddenly become smaller? Can we get back the missing disk partition space?

Although a friend does not save any files to the hard drive C partition, the Windows XP operating system produces a large volume of log files or temporary files during the long run, and it is these long accumulated junk files that "quietly" encroach on the space of the hard disk C partition. These junk files are typically saved automatically in the "Windows\Temp" folder of the hard disk C partition and in the "Documents and Settings\ user account name \local Settings\Temp" folder, because they are not very practical, We can get into these folder windows on a regular basis and delete them in time to free up the disk space they occupy. Of course, if we often use IE browser internet browsing information, IE will also put our previous access to the content of the Web page to the hard disk C partition, this part of the content of the disk partition space consumption is sometimes a large number, for this we can periodically to "Documents and Settings\ User account name \local This part of the junk in the Settings\Temporary Internet Files folder window. If we have already upgraded the Windows XP operating system, we also see a system backup folder like "$NTUninstallK ***$" in the Windows folder window, and once we enable the System Restore function, Then the backup folder will also cause the hard disk C partition space to gradually become smaller.

2, can not double-click into the hard drive

There is a computer installed Windows XP operating system, the hard disk in the system is divided into C, D, E, f four partitions, previously we just double-click the partition icon method can enter the corresponding hard disk partition space. But I don't know what's going on lately, when you double-click the C partition icon with the mouse, you can never open the C-Disk partition window, you can only right-click the partition icon and execute the Open command in the right-click menu to enter the C-Disk window, and we also see the command option "AutoPlay" in the right-click menu. In the face of this weird "harassment" that can't be double-clicked into hard disk space, how do we deal with it?

With the right mouse click on the C partition icon, the "AutoPlay" command option appears in the system's right-click menu, so we conclude that the C-disk partition has a "Autorun.inf" file under it, and it is the existence of the file that makes it impossible for us to enter the C-Packing directory window by double-clicking the mouse. We just click the right mouse button to enter the partition window, the "Autorun.inf" file deleted, and the "Autorun.inf" files related to the program all removed clean, and then we can double-click the mouse to re-enter the C-Packing directory window.

Of course, "autorun.inf" files are typically system-hidden files, in the default state we often can't see its "shadow", let alone remove it from the hard drive, at this point, we can in the My Computer window, click on the menu bar Tools/Folder Options command, In the Pop-up Folder Options Settings window, click the View tab, open the label page shown in Figure 1, select the "Show All Files and folders" item in the page, and then click the OK button, so we'll see the "Autorun.inf" file again when we get into the C-Packing directory window. Figure "out.

3. Unable to delete hard drive files

There's a friend. When you try to delete the AVP-formatted file on your hard disk, you find that the type of file cannot be deleted, and when you delete the file, the error prompts such as "Delete file error, Access denied, please make sure the disk is not full or write protected". However, when the system to switch to Safe mode state, the friend found that the AVP format of the file was deleted, the face of this hard disk access strange phenomenon, how do we solve it?

Actually encounter this kind of hard disk access weird phenomenon, we can try to delete other types of normal files, see if the system can pop up "delete file error, Access denied, please determine the disk is not full or write protection" such as the error prompt, Without such a hint, the currently pending deletion of the AVP file is currently running. In fact, the AVP file is actually antivirus software Kaspersky related program files, in the default state, Kaspersky antivirus program is often in the monitoring of the operation of the virus, in this state to remove any files related to the antivirus program, the system will pop up "delete file error, Access denied please make sure that the disk is not full or write-protected with this error prompt. And when we switch the system to Safe mode, the reason is able to delete the AVP format files are normal, because in the system security mode, Kaspersky antivirus program often will not be automatically loaded with the system, so that there is no use of the AVP file and ordinary documents, like the arbitrary deletion of people.

4, hard drive detection can not pass

Units in the Office of a common computer at the start of each boot, automatic hard drive detection, but in the detection of progress at 66% position when the detection operation can not be carried out, at this time also can not use the thermal boot function to reboot the system, must turn off the power to cold start. Now only in the System Start screen prompts to detect the hard drive at that moment, press any key on the keyboard in time to ignore the hard drive detection operation, and then log into the Windows system interface after performing any operation is normal. Then why is the system in the detection of the hard drive, hard drive detection can not be successfully passed it? Will it be hardware damage to the hard drive?

From the above description of the phenomenon, we estimate that the unit common computer hard disk is likely to have hardware damage, encountered this phenomenon when we first have to do is to quickly put the hard disk important data content, move to other relatively safe location. After doing the backup of the data, the next thing we need to do is to switch the system to DOS and execute the "fdisk/mbr" string command on the DOS command line to try to fix the soft faults in the hard drive. We can download and install some professional hard disk bad track detection tools, to carefully check the local hard drive is bad, if the hard drive is not found, the hard drive detection can not pass the phenomenon is likely to be caused by a logical failure, At this point we can only use the method is to find the corresponding brand of hard disk logic bad repair tool to restore the hard drive, I believe that such a hard drive detection can not be solved by the phenomenon.

5, standby when the hard drive can not rest

When a computer is on standby, its hard drive signal is still in a flash state, we know that if the hard drive signal is so crazy every day, the hard drive life is likely to be greatly shortened. So what can we do to make the hard disk in the standby state, but also to get adequate "rest"? In fact, caused by the hard drive lights in the system standby state still crazy flash factors have a lot of, we can follow the following steps to do one after the next, you can ensure that the hard drive in time to get "rest."

First check to see if the local computer system has some professional Disk Defragmenter installed, if installed, you can uninstall them from the local system, because these professional disk cleaning software generally have the system in standby state automatically defragment the disk, As a result, the professional Disk Defragmenter will "force" the hard drive to perform a disk defragmentation operation on standby. Of course, we can also not uninstall these professional disk-finishing programs, but you must go to its settings interface, the disk defragmentation feature temporarily shielded, so that the hard drive in standby will not be "forced" to perform disk defragmentation operations, so you can get enough "rest" time.

Second, check whether the local system installed similar jiangmin, Jinshan and rising such as domestic anti-virus software, these anti-virus software like in the system on standby when the files on the hard disk to perform scanning, killing operations, then the hard drive naturally can not get enough rest time. Once discovered that the system installs the above anti-virus software, we must enter the corresponding program to set the interface, will the corresponding automatic killing function temporarily close off. For example, if the local system installed the rising anti-virus software, then we can in the antivirus program interface in order to execute the "settings"/"Detailed Settings" menu commands, click the Customize Tasks tab in the Settings window that pops up and open the label page shown in Figure 2, and in the right area of the interface, use timed scan, "Shutdown detection floppy disk", "Use the boot scan" and "Use screen saver antivirus" and other options of the selected state all canceled, and click the "OK" button, so that the anti-virus software in the system will be on standby in the future, not automatically "forced" hard drive to keep working.

Next, check to see if the local system's "Indexing Service" services are turned on, once the service is opened, the service will automatically index the data files saved on the hard disk when the system is idle, and then the hard drive at idle can only follow together. "Up. So, when we find that the Indexing Service is already running, we can open the System's Services List window, double-click the "Indexing Service" item in it, click the Stop button in the Property Settings window that appears, and set the startup type to "manual , and then click the OK button.

In addition, we'd better uninstall all the desktop search tools, memory optimization tools, and so on in the local system from the system, because these tools will also make the hard drive "rest".