Long file names are not supported in the target system. Enter the file name.

Long file names are not supported in the target system. Enter the file name.

The target system does not support long file names. Enter the file name.

Problem scene

Server: Dell poweredge r210

Set SATA Controller to ATA Mode

Hard Disk: samsung ssd 850 evo 250G

Use the DG partition tool in the cabbage PE to partition the hard disk.


If the disk is used to install the system, you need to set it as the primary partition and activate the partitioning.

After partitioning and formatting, copy the file to the hard disk. This error occurs: the target system does not support long file names. Enter the file name.

Solution

Some people say that the Registry is faulty.
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ USBSTOR]
"Start" = dword: 00000001. This is 3. Change it to 1;
After I try it, it doesn't work at all!

Finally, restart the PE system and copy the file.

Copyright Disclaimer: This article is an original article by the blogger and cannot be reproduced without the permission of the blogger.