Follow these steps:
Attention:
1. The use of this feature must be two mobile phones to support NFC features.
2. Samsung mobile phone must use the original battery.
1. Under the Standby page, click "Application".
2. Click "Set".
3. Click "More Settings".
4. Find the NFC option, slide the right rectangular slider to the right, and the green indication is turned on.
5. After the "NFC" option is turned on, click "S Beam" and slide the rectangular slider on the right side of the screen to the right, showing that the green rep is turned on.
Two mobile phones are set up, please continue to the following operation: (a mobile phone to B mobile phone transmission video as an example. ）
Figure 1:a Mobile Phone Interface Select video.
In a mobile phone to select the video you want to transfer, and then put the B cell phone and a mobile phone back to the rear, a mobile phone screen will show "Touch can send", tapping a mobile phone screen can send files.
Figure 2:b Phone interface to receive data.
b phone screen will show "ready to share files through s beam." Please separate the equipment ", at this time, please separate AB mobile phone, the contents of the transmission passed.
