New Yang Tian Vkeb model BIOS password, hard drive password setup and removal method

Scope of application:

V490 V480 M490 M480 B490 B480 E49 K49 K29

Operation Steps:

Note: Before setting the BIOS password, please keep in mind the password set, once forgotten, can only send to repair Lenovo after-sales service station to assist in processing.

BIOS Super Administrator password setting method:

1. Turn on the F1 key to enter the BIOS and use the left and RIGHT arrow keys to select the Security menu item, as shown below:

2. Use the UP and DOWN ARROW keys to select the Password option, and hit enter, from the bottom of the red box mark, disabled indicates that the BIOS Super Administrator password is not currently set, such as enabled, indicates that the BIOS password is currently set.

3. To set the BIOS Super Administrator password, select the first line suppervisor Password, enter enter the same character as the password in Enter New Password and confirm New Password two lines (each line of password entry is completed, The Setup Confirmation window interface is displayed as follows:

4. In the Setup Confirmation window, by default Select Continue, direct enter confirmation, at this time the Super Administrator password is completed setting, that is, the password status is currently displayed as enabled, as shown below:

5. After creating the BIOS Super Administrator password, when the user enters the BIOS again, the user will be prompted to enter the password, the interface as shown below:

BIOS Super Administrator password removal method:

1. Power on the F1 key, if the BIOS password is set before, there will be a white lock icon in the upper left corner of the screen, followed by the cursor flashing, here Enter the BIOS password, you can enter the BIOS, use the left and right keyboard to select the Security menu item, as shown below:

2. Select the Password option, enter the following interface (the red box marked as enabled means that the BIOS Super Administrator password is currently set):

3. Select Supervisor Password Enter the following interface:

4. In the first line enter current password Enter the currently Super Admin password and return to the second line without any character input, continue to enter the third line, continue to enter, in the Popup Setup Confirmation window enter confirm, The Super Administrator password is emptied at this point.

BIOS Hard Drive Password setting method:

1. Under BIOS, select the Security menu item, select the Password option, and tap the ENTER key to enter the following screen:

2. Select the hard Disk1 password entry and enter the following interface (where the drive password setting has two options: if you select the following figure, Mark 1, you can set the normal user password separately, if you choose the following figure, Mark 2, you can set the normal user and administrator password):

How do I set the hard drive password for a normal user?

1. If you only want to set the hard disk Normal user password, select "User" Enter, enter the following interface;

2. Enter the new password in the first line "Enter new Password", and then enter the new password again in the second line "Confirm new Password", at which time the password is set to complete, jump back to the main setting interface, the following image marks "User", Indicates that the hard drive password is set only for normal users.

How to set the hard drive password and the hard drive administrator password at the same time?

1. In the hard disk password Settings selection interface, select "User+master" and enter the following prompt interface;

2. Directly hit enter, in the following interface as described above to fill in the password can be;

3. General user Password completion, enter the confirmation, enter the following interface;

4. Hit the ENTER key directly, continue to set the hard drive administrator password;

5. After completing the hard drive Administrator password, enter the following interface prompt;

6. Hit the ENTER key directly, then go back to the password settings main interface, you can see the password setting status of "User+master", set to complete.

BIOS hard Drive Password removal method:

The first thing you need to do is to determine whether the user or User+master password was set by the following interface:

Only the removal method of the hard disk user password is set:

1. If only the user password is set, select Hard Disk Password, and tap enter keyboard to enter the following interface;

2. In the first line enter the current password entered the Set password, enter to jump to the second line, do not enter any characters, direct enter to jump to the third line, do not enter any characters, again enter, enter the confirmation interface, again enter, this is the completion of the hard drive password removal.

Set the User+master password for the hard drive:

1. If the user+master password is set, select Hard Disk Password and tap enter keyboard to enter the following interface;

2. Select the "Master HDP" option to enter the following interface; (the user password cannot be cleared separately, only by removing the Master password)

3. In the first line enter the current password entered the Set password, enter to jump to the second line, do not enter any characters, directly enter to jump to the third line, do not enter any characters, again enter, enter the confirmation interface;

4. Enter again to complete the hard drive password removal.