Notebook disassembly and cleaning memory Section tutorial

Because the notebook parts are very small, in the disassembly of computer memory, some places also need to pay attention to, lest damage pen this, this tutorial is about the notebook to remove the memory to pay attention to several aspects.

1, notebook memory sockets have cover protection, the first step is to first remove the cover.

Most laptops have a logo on the cover, some are concave memory graphics, and from the size of the cover can be seen, the size of the general memory cover is larger than the memory bar.

Of course there are a lot of notebook cover is one-piece, covers a large area, open the cover can also see the notebook's radiator, memory hard disk and other components.

In addition, some covers unscrew the screws and the card buckle. This time don't be afraid, adventurousness, don't be afraid of bad (most of the cover quality is quite good) a little hard to open the back cover, if you find that no matter how hard you can not open, it must be a screw does not twist, then you have to pay attention to whether there is a foot or sticker back Whether the screws are still hidden below the screw is not open.

In addition, there is static electricity in the hands of the winter, before the replacement of memory first touch metal, lest accidentally let electrostatic breakdown motherboard.

2, if your notebook memory slot only one, then upgrade the memory will need to use the replacement method, the old memory replaced, which requires the original memory removed.

The method is very simple, memory on both sides will have two spring buckle, with the finger tip of the right hand will pull off the card, memory will automatically eject, and then remove it.

3, the installation of memory can be said to remove the memory of the reverse steps, but also very simple. Simply insert the new memory into the memory slot with 30° angle (memory has anti-plug design, do not worry about the plug), and then press it.

4, the last is to check to see if the memory is recognized by the system.

The method is very simple, first need to enter the notebook BIOS, let the BIOS first identify the memory, most notebooks are on the boot press F2 key (on the boot will be prompted, or reference manual) into the BIOS. When you reboot and boot into the system, you can see the memory capacity in the General tab by right-clicking the computer or My computer.