Old Peaches WinPE how to use

Old Peaches WinPE is an embedded XP PE operating system, generally do the tool disk, system crashes can be used to repair the system, but also to back up the data, the system lost password can also modify the password, can be from the CD, U disk, mobile hard disk, such as boot.

First, prepare before preparation (note: Before operation backup good u disk data)

1. Computer memory can not be less than 512MB.

The capacity of the 2.U disk is greater than 256MB.

3. Download the old Peaches U disk boot disk production tool Build110828. (Take the Build110828 version here for example)

4. Ready to install the ghost system.

Second, the installation of "Old Peaches U disk Startup Disk Production tool Build110828"

1. After installation, double-click the "Old Peaches U disk Startup Disk Production tool Build110828", the picture below: Insert U disk.

2. Click on the "one key to make USB boot Disk" button (note the backup of important data before the operation).

3. Production success, the following figure, this time you can eject U disk.

Note: As U disk system files hidden, you will find that U disk space will be reduced by around 150M, please do not worry about this time no production success.

Third, copy the system files to the U disk

1. Create a good disk in the root directory under a new folder named Gho, will be prepared to duplicate the system name Xp.gho and copied to the Gho folder.

Four, restart into the BIOS set U disk startup (hint: Please insert a U disk, then enter the BIOS)

Press the "DEL" key to enter the BIOS on the first screen of computer startup (the host may not have F2 or F1. Please click the interface prompts to enter), select Advanced BIOS FEATURES, boot Sequence (boot sequence), Set to USB-HDD mode, first, the method is to press PageUp or PageDown key on the item to convert the option. When set, press ESC, return to the BIOS main interface, select Save and Exit (save and exit BIOS settings, press F10 directly, but not all BIOS support) Enter to confirm exit BIOS setup.

The following figure is the BIOS interface:

Five, enter the "Old Peaches U disk Startup Disk Production tool" Start Menu interface

1. Point out "Install Gho to hard disk first Partition" can reload system.

"Old Peaches WinPE" and a list of common tools: